2021 |
Paper List on MOST website" href="/en/per/per1/journal/Paper-List-on-MOST-website-73320465" target="_blank">Paper List on MOST website
|
|
|
|
2015 |
Response of a 50 kW Organic Rankine Cycle System Subject to Influence of Evaporators |
Lee, Y.R., Kuo, C.R., Liu, C.H., Cheng, P.Y., Fu, B.R., and Wang*, C.C |
Energy Procedia |
|
2015 |
Parametric Study on Thermal Performance of Microchannel Heat Sinks with Internal Vertical Yshaped Bifurcations |
Xie*, G., Shen, H., and Wang*, C.C. |
Int. J. of Heat and Mass Transfer |
|
2015 |
Two-phase Pressure Drops and Flow Pattern Observations in 90 degree Bends Subject to Upward, Downward and Horizontal Arrangements |
Hsu, L.J., Chen, I.Y., Chyu, C.M., and Wang*, C.C. |
Experimental Thermal and Fluid Science |
|
2015 |
Performance of Bare-tube Bundle Having Small Diameter Tube: With and Without Partial Bypass |
Chang, N.C., Li, C.J., and Wang*, C.C., |
Int. Communications in Heat and Mass Transfer |
|
2015 |
Review on CO2 Heat Pump Water Heater for Residential Use in Japan |
Zhang, J.F., Qin, Y., and Wang*, C.C. |
Renewable & Sustainable Energy Reviews |
|
2015 |
Performance Improvement of High Power Liquid-cooled Heat Sink Via Non-uniform Metal Foam Arrangement |
Chen, K.C., and Wang*, C.C. |
Applied Thermal Engineering |
|
2015 |
Performance of Piezoelectric Fins for Heat Dissipation |
Sheu, W.J., Chen, G.J. and Wang*, C.C |
Int. J. of Heat and Mass Transfer |
|
2015 |
The New Mathematical Models for Plain Fin-and-Tube Heat Exchangers With Dehumidification |
Pirompugd, W., Wang, C.C., and Wongwises, S. |
J. of Heat Transfer |
|
2015 |
Effect of Pressure on the Moisture Adsorption of Silica Gel and Zeolite 13X Adsorbents |
Lee, Y.C., Weng, L.C., Tseng, P.C., and Wang*, C.C. |
Heat and Mass Transfer |
|
2015 |
An Experimental Study of Inclination on the Boiling Heat Transfer Characteristics of a 440 um Micro-Channel Heat Sink Using HFE-7100 |
Hsu, L.C., Cion, S.W., Lin, K.W., and Wang*, C.C. |
Int. Communications in Heat and Mass Transfer |
|
2015 |
Effect of Driven Frequency on Flow and Heat Transfer of Impinging Synthetic Air Jet |
Liu*, Y.H., Tsai, S.Y., and Wang, C.C |
Applied Thermal Engineering |
|
2015 |
An Experimental Study of the Air-side Performance of Fin-and-tube Heat Exchangers Having Plain, Louver, and Semi-dimple Vortex Generator Configuration |
Wang*, C.C., Chen, K.Y., Liaw, J.S., and Tseng, C.Y. |
Int. J. of Heat and Mass Transfer |
|
2015 |
Performance and Flow Distribution of the Plate Heat Exchanger With Supercritical Fluid of Carbon Dioxide |
Zhu, C.X., Tang, Y.C., and Wang*, C.C |
Journal of Thermal Engineering |
|
2014 |
System Performance of R-1234yf Refrigerant in Air-conditioning and Heat Pump System – An Overview of Current Status |
Wang*, C.C |
Applied Thermal Engineering |
|
2014 |
A Co-axial Multi-tube Heat Exchanger Applicable for a Geothermal ORC Power Plant |
Hsieh, J.C., Lee, Y.R., Guo, T.R., Liu, L.W., Cheng, P.Y., and Wang*, C.C. |
Energy Procedia |
|
2014 |
A Novel Heat Dissipation Fin Design Applicable for Natural Convection Augmentation |
Charles, R., and Wang*, C.C. |
Int. Communications in Heat and Mass Transfer |
|
2014 |
Influence of electrode configuration on the heat transfer performance of a LED heat source |
Chen, I.Y., Chen, C.J., and Wang*, C.C. |
Int. J. of Heat and Mass Transfer |
|
2014 |
Effect of Partial Bypass on the Heat Transfer Performance of Dehumidifying Coils |
Wang*, C.C., Cheng, Y.C., Liaw, J.S., and Tseng, C.Y. |
Int. Communications in Heat and Mass Transfer |
|
2014 |
Performance and two-phase flow pattern for micro flat heat pipes |
Yang, K.S., Lin, C.C., Shyu, J.C., Tseng, C.Y., and Wang*, C.C. |
Int. J. of Heat and Mass Transfer |
|
2014 |
Scale Effect on Dropwise Condensation on Superhydrophobic Surfaces |
Lo, C.W., Wang, C.C., and Lu*, M.C. |
ACS Applied Materials & Interfaces |
16 |
2014 |
Dynamic Response of a 50 kW Organic Rankine Cycle System in Association With Evaporators |
Lee, Y.R., Kuo, C.R., Liu, C.H., Fu, B.R., and Wang*, C.C. |
Energies |
|
2014 |
Spatial Control of Heterogeneous Nucleation on the Superhydrophobic Nanowire Array |
Lo, C.W., Wang, C.C., and Lu*, M.C. |
Advanced Functional Materials |
9 |
2014 |
Performance Evaluation of a Tube-in-tube CO2 Gas Cooler Used in a Heat Pump Water Heater |
Yu, P.Y., Lin W.K. and Wang*, C.C. |
Experimental Thermal and Fluid Science |
|
2014 |
Investigation of the Performance of Pulsating Heat Pipe Subject to Uniform/Alternating Tube Diameters |
Tseng, C.S., Yang, K.S., Chien, K.H., Jeng, M.S., and Wang*, C.C. |
Experimental Thermal and Fluid Science |
|
2014 |
Influence of Lubricant on the Nucleate Boiling Heat Transfer Performance of Refrigerant – a Review |
Wang*, C.C., Hafner, A., Kuo, C.S., and Hsieh, W.D. |
Heat Transfer Engineering |
6-8 |
2013 |
Modeling and Simulation of the Transcritical CO2 Heat Pump System |
Lin, K.H., Kuo, C.S., Hsieh, W.D. and Wang*, C.C. |
Int. J. of Refrigeration |
|
2013 |
A Visual Observation of the Air Flow Pattern for the High Speed Nozzle Applicable to High Power Laser Cutting and Welding |
Tseng,C.S., Chen, C.M., and Wang*, C.C. |
Int. Communications in Heat and Mass Transfer |
|
2013 |
An Experimental Study on the Heat Dissipation of LED Lighting Module Using Metal/Carbon Foam |
Yang, K.S., Chung, C.H., Lee, M.T., Chiang, S.B., Wong, C.C., and Wang*, C.C. |
Int. Communications in Heat and Mass Transfer |
|
2013 |
Simulation of Velocity Distribution and Pressure Drop in Every Channel in the Printed Circuit Heat Exchanger |
Lo*, H.P., Hung, C.H., and Wang, C.C. |
ECS Transactions |
1 |
2013 |
Investigation of the two-phase convective boiling of HFO-1234yf in a 3.9 mm diameter tube |
Lu, M.C., Tong, J.R., and Wang*, C.C. |
Int. J. Heat and Mass Transfer |
|
2013 |
Effect of oscillatory EHD on the heat transfer performance of a flat plate |
Sheu, W.J., Hsiao, J.J., and Wang*, C.C. |
Int. J. of Heat and Mass Transfer |
|
2013 |
Effect of Non-uniform Heating on the Performance of the Microchannel Heat Sinks |
Liu, C.K., Yang, S.J., Chao, Y.L., Liu, K.Y., and Wang*, C.C. |
Int. Communications on Heat and Mass Transfer |
43 |
2013 |
On Studying Fluidic Motions in an Oscillating Heat Pipe |
Chen, H.M., Chiang, C.M., Chien, K.H., Wang*, C.C. |
Applied Mechanics and Materials |
|
2013 |
Orientation Effect on Heat Transfer of a Shrouded LED Backlight Panel With a Plate-fin Array |
Shyu, J.C., Hsu, K.W., Yang, K.S., and Wang*, C.C. |
Int. Communications on Heat and Mass Transfer |
|
2013 |
An Overview for the Heat Transfer Performance of HFO-1234yf |
Wang*, C.C. |
Renewable & Sustainable Energy Reviews |
|
2013 |
Enhanced Cooling for LED lighting Using Ionic Wind |
Chen, I.Y., Kuo, M.Z., Yang, K.S., Wang*, C.C. |
Int. J. of Heat and Mass Transfer |
|
2012 |
Transient Response of a 50 kW Organic Rankine Cycle System |
Lee, Y.R., Kuo, C.R., and Wang*, C.C |
Energy |
|
2012 |
Performance of a tube-in-tube CO2 gas cooler |
Yu, P.Y., Lin, K.H., Lin, W.K., and Wang*, C.C. |
Int. J. of Refrigeration |
|
2012 |
A Comparative Study of Nozzle/Diffuser Micropumps with Novel Valves |
Yang, K.S., Chao, T.F., Chen, I.Y., Wang*, C.C., Shyu, J.C. |
Molecules |
|
2012 |
A Novel ’Partial Bypass’Concept to Augment Performance of Air-cooled Heat Exchangers |
Wang*, C.C., Chen, K.Y., Liaw, J.S., and Tseng J.Y. |
Int. J. of Heat and Mass Transfer |
|
2012 |
An Overview of the Effect of Lubricant on the Heat Transfer Performance on Conventional Refrigerants and Natural Refrigerant R-744 |
Wang*, C.C., Hafner, A., Kuo, C.S., and Hsieh, W.D. |
Renewable and Sustainable Energy Reviews |
|
2012 |
Theoretical study of oscillatory phenomena in a horizontal closed-loop pulsating heat pipe with asymmetrical arrayed minichannel |
Chiang, C.C., Chien, K.H., Chen, H.M., Wang*, C.C. |
Int. Communications in Heat and Mass Transfer |
|
2012 |
Enhanced Heat Transfer Performance of Air-cooled HeatExchangers Using ’Partial Bypass’ Concept |
Wang, C.C. |
Heat Transfer Engineering, |
|
2012 |
A Novel Design of Pulsating Heat Pipe With Fewer Turns Applicable to All Orientations |
Chien, K.H., Lin, Y.T., Chen, Y.R., Yang, K.S., and Wang*, C.C. |
Int. J. of Heat and Mass Transfer |
|
2012 |
Air-side performance of herringbone wavy fin-and-tube heat exchangers under dehumidifying condition – Data with larger diameter tube |
Wang*, C.C., Liaw, J.S. |
Int. J. of Heat and Mass Transfer |
|
2012 |
Effect of Number of Tube Rows on the Air-side Performance of Crimped Spiral Fin-and-tube Heat Exchanger With a Multipass Parallel and Counter Cross-flow Configuration |
Pongsoi, P., Pikulkajorn, S., Wang, C.C., and Wongwises, S. |
Int. J. of Heat and Mass Transfer, accepted. |
|
2012 |
Effect of Inclination on the Convective Boiling Performance of A Microchannel Heat Sink Using HFE-7100 |
Wang*, C.C., Chang, W.C., Dai, C.H., Lin, Y.T., and Yang, K.S. |
Experimental Thermal and Fluid Science |
|
2011 |
Recent advances in Fin-and-Tube Heat Exchangers |
Wang, C.C. |
Int. J. of Air-Conditioning and Refrigeration, accepted. |
|
2011 |
The Effect of Ventilation Types on Pollutant Removal in a Large Space Plant with Multiple Pollutant Sources |
Huang, J.M., Hsu, S.P., Wu, Y.L., Chen, H.Y., and Wang, C.C. |
Indoor and Built Environment |
|
2011 |
Analysis of a 50 kW Organic Rankine Cycle System |
Kuo, C.R., Hsu, S.W., Chang, K.H., and Wang, C.C. |
Energy |
|
2011 |
Liquid Flow Distribution Characteristics in Compact Parallel Flow Heat Exchangers, Part II: Modified Inlet Header |
Wang, C.C., Yang, K.S., Tsai, J.S., and Chen, I.Y. |
Applied Thermal Engineering |
|
2011 |
Liquid Flow Distribution Characteristics in Compact Parallel Flow Heat Exchangers, Part I: Typical Inlet Header |
Wang, C.C., Yang, K.S., Tsai, J.S., and Chen, I.Y. |
Applied Thermal Engineering |
|
2011 |
Thermal Characterization of Shrouded Plate Fin Array on an LED Backlight Panel |
Shyu, J.C., Hsu, K.W., Yang, K.S., and Wang, C.C., |
Applied Thermal Engineering |
|
2011 |
Enhancements of Thermal Conductivities with Cu, CuO and Carbon Nanotube Nanofluids and Application of MWNT/water Nanofluid on a Water Chiller System |
Liu, M.S., Lin, M. C.C., and Wang, C.C. |
Nanoscale Research Letters |
|
2011 |
Effect of Cannelure Fin Configuration on Compact Aircooling Heat Sink |
Wang, C.C., Yang, K.S., Liu, Y.P., and Chen, I.Y. |
Applied Thermal Engineering |
|
2011 |
Effect of Fin Pitches on the Air-side Performance of Crimped Spiral Fin-and-tube Heat Exchangers With a Multipass Parallel and Counter Cross-flow Configuration |
Pongsoi, P., Pikulkajorn, S., Wang, C.C., and Wongwises, S. |
Int. J. of Heat and Mass Transfer |
|
2011 |
On the Heat Transfer Correlation for Membrane Distillation |
Wang, C.C. |
Energy Conversion and Management |
|
2011 |
Heat Transfer and Flow Pattern Characteristics for HFE-7100 Within Microchannel Heat Sinks |
Yang, K.S., Jeng, Y.R., Huang, C.M., and Wang, C.C. |
Heat Transfer Engineering |
No. 7-8 |
2011 |
A Numerical Investigation of the Geometric Effects on the Performance of Plate Finned-Tube Heat Exchanger |
Lu, C.W., Huang, J.M., Nien, W.C., and Wang, C.C. |
Energy Conversion and Management |
|
2011 |
Air-side Performance of Herringbone Wavy Fin-and-tube Heat exchangers – Data With Larger Diameter Tube |
Wang, C.C., Liaw, J.S., Yang, B.C. |
Int. J. of Heat and Mass Transfer |
|
2011 |
A Study of Bubble Venting in a Microchannel With Hydrophobic Nanoporous Membranes |
Shyu, J.C., Li, S.L., Chen, I.Y., Yang, K.S., Chen, W.S., Chang, S.Y., and Wang, C.C. |
J. of Flow Visualization and Image Processing |
|
2010 |
“An Experimental Study of air Cooling Thermal Module Using Various Enhancements at low Reynolds Number Region,” |
Yang, K.S., Li, S.L., Chen, I.Y., Chien, K.H., Hu, R., and Wang, C.C. |
Int. J. of Heat and Mass Transfer |
|
2010 |
“Novel No-moving-part Valves for Microfluidic Devices,” |
Yang, K.S., Liu, Y.H., Wang, C.C., and Shyu, J.C. |
Microsystem Technology |
|
2010 |
“A New Correlation and the Review of Two-phase Flow Pressure Change Across Sudden Expansion in Small Channels,” |
Wang C.C., Tseng, C.Y., and Chen, I.Y. |
Int. J. of Heat and Mass Transfer |
|
2010 |
“A Survey of Recent Patents of Fin-and-Tube Heat Exchangers From 2001~2009,” |
Wang, C.C. |
Int. J. of Air-Conditioning and Refrigeration |
no. 1 |
2010 |
“Investigation of Bubble Effect in Microfluidic Fuel Cells by a Simplified Microfluidic Reactor,” |
Shyu, J.C., Lee, C.J., Wei, C.S., and Wang, C.C. |
Applied Thermal Engineering |
|
2010 |
“On the Heat Transfer Characteristics of Heat Sinks: With and Without Vortex Generators,” |
Yang, K.S., Jhong, J.H., Lin, Y.T., Chien, K.H., and Wang, C.C. |
IEEE Transactions on Components & Packaging Technologies |
|
2010 |
“An Investigation of a Top-mounted Domestic Refrigerator,” |
Yang, K.S., Chang, W.J., Chen, I.Y., and Wang, C.C. |
Energy Conversion and Management |
|
2010 |
A Novel Condensate-free Refrigerated Cold Plate for Electronic Cooling |
Wu, Y.L., Yang, K.S., Chen, M.Y., and Wang, C.C. |
Int. J. of HVAC&R Research |
No. 1 |
2010 |
Surface Modification of Nano-Porous Anodic Alumina Membranes and Its Use in Electroosmotic Flow |
Chen, Y.F., Hu, Y.H., Chou, Y.I., Lai, S.M., and Wang, C.C. |
Sensors and Actuators, Part B, Chemical |
|
2010 |
Effect of Passive Flow Deflector on the Flux Improvement in Direct Contact Membrane Distillation |
Liu, C.L., Chen, Y.F., Sheu, W.J., and Wang, C.C. |
Desalination |
|
2010 |
Influence of Inlet Configurations on the Refrigerant Distribution of a Dual Cold-plate System |
Yang, K.S., Yu, K.H., Chen, I.Y., and Wang, C.C. |
Heat Transfer Engineering |
|
2010 |
Airside Performance of Fin-and-tube Heat Exchangers in Dehumidifying Conditions – Data With Larger Diameter |
Liu, Y.C., Wongwises, S., Chang, W.J., and Wang, C.C. |
Int. J. of Heat and Mass Transfer |
|
2010 |
Two-phase Flow Across Small Sudden Expansions/Contractions |
Chen, I.Y., Wongwises, S., Yang, B.C., and Wang, C.C |
Heat Transfer Engineering |
|
2010 |
Water Permeation analysis on gas Diffusion Layer of PEM fuel Cells for Flooding Issue Annotation |
Chou, Y.I., Shaio, Z.Y., Chen, Y.F., Sung, L.Y., Yang, W.M., and Wang, C.C. |
J. of Power Sources |
|
2010 |
Correlations for Wet Surface Ratio of Fin-and-Tube Heat Exchangers |
Pirompugd, W., Wang, C.C., and Wongwises, S. |
Int. J. of Heat and Mass Transfer |
|
2009 |
“A Comparative Study of an Open Vertical Refrigerated Multi-Deck – A Numerical Study and its Experimental Validation,” |
Chen, Y.F., Lin, H.W., Hsieh, W.D., Lin, J.Y., and Wang, C.C. |
ASHRAE Transactions |
Part 2 |
2009 |
“System Augmentation of an Air-cooled Chiller Using Nanofluids,” |
Liu, M.S., Lin, M. C.C., Hu, R., Liaw, J.S., and Wang, C.C. |
ASHRAE Transactions |
Part 1 |
2009 |
“Experiments on the Power Consumption Comparison Between a Constant Speed Air-conditioner and a Variable Speed Air-conditioner,” |
Chen, I.Y., Chen Y.M., Chang, Y.J., Wei, C.S., and Wang C.C. |
ASHRAE Transactions |
Part 1 |
2009 |
“Numerical Simulation of a Heat Sink Embedded with a Vapor Chamber and Calculation of Effective Thermal Conductivity of a Vapor Chamber,” |
Chen, Y.S., Chien, K.H., Ferng, Y.M., Wang, C.C., Hung, T.C., and Pei, B.S. |
Applied Thermal Engineering |
|
2009 |
“Heat Transfer Enhancement by Needle-Arrayed Electrodes - An EHD Integrated Cooling System,” |
Sheu, W.J., Huang, R.T., and Wang, C.C. |
Energy Conversion and Management |
|
2009 |
“Effect of Variable Heating Load on the Refrigerant Distribution of a Dual Cold-plate System,” |
Tien, C.W., Sheu, W.J., Yu, K.H., and Wang, C.C. |
ASME J. of Electronic Packaging |
|
2009 |
“Heat Transfer by a Piezoelectric Fan on a Flat Surface Subject to the Influence of Horizontal/Vertical Arrangement,” |
Liu, S.F., Huang, R.T., Sheu, W.J., and Wang, C.C. |
nt. J. of Heat and Mass Transfer |
|
2009 |
“A Review on Reduction Method for Heat and Mass Transfer of Fin-and-Tube Heat Exchangers Under Dehumidifying Conditions,” |
Pirompugd, W., Wang, C.C., and Wongwises, S. |
Int. J. of Heat and Mass Transfer |
|
2009 |
“Two-phase Flow Pattern and Frictional Performance Across Small Rectangular Channels,” |
Chen, I.Y., Chen, Y.M., Yang, B.C., and Wang, C.C. |
Applied Thermal Engineering |
|
2009 |
“Two-phase Flow Pressure Change Subject to Sudden Contraction in Small Rectangular Channels,” |
Chen, I.Y., Tseng, C.Y., Lin, Y.T., and Wang, C.C. |
Int. J. of Multiphase Flow |
|
2008 |
“Detection of PB2+ Ions Using Carboxyl-functionalized Microcantilever Sensor,” |
Chou, Y.I., Wang, C.C., Wu, C.Y., Hsu, K.S., Chiang, H., and Lai, S.M. |
Sensor Letters |
|
2008 |
“Influence of Bonding Glues on the Vibration of Piezoelectric Fans,” |
Huang, R.T., Sheu, W.J., and Wang, C.C. |
Sensors and Actuators, Part A, Physical, |
|
2008 |
“A Visual Observation of the Air-water Two-phase Flow in Small Diameter Tubes Subject to the Influence of Vertical Return Bends,” |
Wang, C.C., Chen, I.Y., Lin, Y.T., Chang. Y.J. |
Chemical Engineering Research and Design, |
|
2008 |
“Extending the Limit of Direct Air-cooling Heat Sink,” |
Wang, C.C. |
Heat Transfer Engineering |
11 |
2008 |
“Two-phase Flow Characteristics Across Sudden Contraction in Small Rectangular Channels,” |
Chen, I.Y., Chu, M.C., Liaw, J.S. and Wang, C.C. |
Experimental Thermal and Fluid Science |
|
2008 |
“Low-voltage Electroosmotic Pumping Using Porous Anodic Alumina Membranes,” |
Chen, Y.F., Li, M.C., Hu, Y.S., Chang, W.J., and Wang, C.C. |
Microfludics and Nanofludics, |
|
2008 |
“Finite Circular Fin Method for Wavy Fin-and-Tube Heat Exchangers under Fully and Partially Wet Surface Conditions,” |
Pirompugd, W., Wang, C.C., and Wongwises, S., |
Int. J. of Heat and Mass Transfer |
|
2008 |
“Sensible Airside Performance of Fin-and-tube Heat Exchangers – Data With Larger Diameter Tube,” |
Liu, Y.C., Hu, R., Yang, B.C., Chen, I.Y., and Wang, C.C. |
ASHRAE Transactions |
1 |
2008 |
“Performance of Nozzle/Diffuser Micro-pump: A Numerical Examination,” |
Yang, K.S., Chen, I.Y., and Wang, C.C. |
J. of Mechanical Engineering Science |
|
2008 |
“Effect of Orientation on the Natural Convective Performance of Square pin fin Heat Sinks,” |
Huang, R.T., Sheu, W.J., and Wang, C.C. |
Int. J. Heat and Mass Transfer, |
|
2008 |
“Two-phase Frictional Pressure Drop Measurements in U-type Wavy Tubes Subject to Horizontal and Vertical Arrangements,” |
Chen, I.Y., Wu, Y.S., Hu, R., and Wang, C.C. |
Applied Thermal Engineering |
|
2008 |
“On the Heat and Mass Analogy of Fin-and-Tube Heat Exchanger,” |
Wang, C.C. |
Int. J. of Heat and Mass Transfer, |
|
2008 |
“The Effects of Frost Thickness on the Heat Transfer of Finned Tube Heat Exchanger Subject to the Combined Influence of Fan Type,” |
Huang, J.M., Hsieh, W.C., Ke, X.J., and Wang, C.C. |
Applied Thermal Engineering |
|
2008 |
“Study on Pd Functionalization of Microcantilever for Hydrogen Detection Promotion,” |
Chou, I.Y., Chiang, H.C., and Wang, C.C. |
Sensors and Actuators, Part B, Chemical |
|
2007 |
“Two-phase Flow Characteristics Across Sudden Expansion in Small Rectangular Channels,” |
Chen, I.Y., Liu, C.C., Chien, K.H., and Wang, C.C. |
Experimental Thermal and Fluid Science |
|
2007 |
“Microcantilever Pb2+ Sensor Using Re-Supramolecular Functionalization with Crown-Ether-Like Recognition Site,” |
Lai, S.M., Wu,C.Y., Hsu, K.S., Wang, C.C., Chiang, H.C., Lu, K.L., and Chou, I.Y. |
Electrochemical and Solid-State Letters |
12 |
2007 |
“A Comparative Study of the Airside Performance of Heat Sinks Having Pin Fin Configurations,” |
Yang, K.S., Chu, W.S., Chen, I.Y., and Wang, C.C. |
Int. J. of Heat and Mass Transfer |
|
2007 |
“A Review of Fin-and-Tube Heat Exchangers in Air-conditioning Applications,” |
Hu, R., and Wang, C.C. |
Int. J. of Air-Conditioning and Refrigeration, |
3 |
2007 |
“Two-phase Frictional Pressure Drop in Small Rectangular Channels,” |
Chen, I.Y., Chen, Y.M., Liaw, J.S., and Wang, C.C |
Experimental Thermal and Fluid Science |
|
2007 |
“A Fully Wet and Fully Dry Tiny Circular Fin Method for Heat and Mass Transfer Characteristics for Plain Fin-and-Tube Heat Exchangers under Dehumidifying Conditions,” |
Pirompugd, W., Wang, C.C., and Wongwises, S. |
ASME J. of Heat Transfer, |
|
2007 |
“Numerical and Experimental Investigations of the Thermal Spreading Effects of Rectangular Conduction Plates and Vapor Chamber,” |
Chen, Y.S., Chien, K.H., Ferng, Y.M., Wang, C.C., Hung, T.C., and Pei, B.S. |
ASME J. of Electronic Packaging, |
|
2007 |
“A PIV Investigation of the Flow Mal-distribution in Multi-Channel Cold-plate Subject to Inlet Locations,” |
Liu, M.X., Sheu, W.J., Chiang, S.B., and Wang, C.C |
J. of Enhanced Heat Transfer |
|
2007 |
“Numerical Investigation of the Intercooler of Two-Stage Refrigerant Compressor,” |
Huang, J.M., Chiang, C.P., Chen, J.F., Chow, Y.L., and Wang, C.C. |
Applied Thermal Engineering |
|
2007 |
“Heat and Mass Transfer Characteristics for Finned Tube Heat Exchangers with Humidification,” |
Pirompugd, W., Wang, C.C., and Wongwises, S. |
AIAA J. of Thermophysics and Heat Transfer |
|
2007 |
“On the Heat Transfer Characteristics of Heat Sinks: Influence of fin Spacing at low Reynolds Number Region,” |
Yang, K.S., Chiang, C.M., Lin, Y.T., Chien, K.H., and Wang, C.C, |
Int. J. of Heat and Mass Transfer |
|
2007 |
“Two-Phase Frictional Pressure Drop of R-134a and R-410A Refrigerant-oil Mixtures in Straight Tubes and U-type Wavy Tubes,” |
Chen, I.Y., Wu, Y.S., Chang, Y.J., and Wang, C.C. |
Experimental Thermal and Fluid Science, |
|
2007 |
“Finite Circular Fin Method for Heat and Mass Transfer Characteristics for Plain Fin-and-Tube Heat Exchangers under Fully and Partially Wet Surface Conditions,” |
Pirompugd, W., Wang, C.C., and Wongwises, S. |
Int. J. of Heat and Mass Transfer |
|
2007 |
“Effect of Inclination Angle on Free Convection Thermal Performance of Louver Fin and Tube Heat Exchanger,” |
Nuntaphan, A., Vitayasai, S., Kiatsiriroat, T., and Wang, C.C. |
Int. J. of Heat and Mass Transfer |
|
2006 |
A Mechanical-Electrokinetic Battery by Using Nano-porous Membrane,” |
Lu, M.C., Satyanarayana, S., Karnik, R., Majumdar A., and Wang, C.C. |
J. of Micromechanics and Microengineering |
|
2006 |
“A Review of Single-phase and Two-phase Flow Characteristics in U-type Return Bends,” |
Chen, I.Y. and Wang, C.C |
Trends in Heat and Mass Transfer |
|
2006 |
“Visual Observation of Two-phase Flow Across Vertically Split U-type Junctions,” |
Chen, I.Y., Tsai, C.W., Hu, R., Wang, C.C. |
J. of Flow Visualization and Image Processing |
|
2006 |
“Distribution of Two-phase Flow Across 2.7 mm Vertically Split U-type Junctions,” |
Chen, I.Y., Tsai, C.W., Yang, B.C., Wang, C.C. |
Chemical Engineering & Technology |
No. 10 |
2006 |
Analysis of Micro Diffuser/Nozzle,” |
Yang, K.S., Liu, M.S., Chen, I.Y., and Wang, C.C. |
J. of Mechanical Engineering Science, |
|
2006 |
“An Amendment of the Generalized Friction Correlation for Louver Fin Geometry,” |
Chang, Y.J., Chang, W.J., Li, M.C., and Wang, C.C. |
Int. J. of Heat and Mass Transfer |
|
2006 |
“Flow Patterns of Two-Phase Flow in Vertical U-Type Return Bends,” |
Wongwises S., Kamsanam, W., and Wang, C.C. |
AIAA J. of Thermophysics and Heat Transfer |
|
2006 |
“A Simplified Transient Three-dimensional Model for Estimating the Thermal Performance of the Vapor Chambers,” |
Chen, Y.S., Chien, K.H., Wang, C.C., Hung, T.C., and Pei, B.S. |
Applied Thermal Engineering, |
|
2006 |
“Corrigendum to “Simultaneous Heat and Mass Transfer Characteristics for Wavy Fin-and-tube Heat Exchangers Under Dehumidifying Conditions” |
Pirompugd W., Wongwises S., and Wang, C.C. |
Int. J. of Heat and Mass Transfer |
|
2006 |
Enhancement of Thermal Conductivity With Cu for Nanofluids Using Chemical Reduction Method,” |
Liu, M.S., Lin, M. C.C., Tsai, C.Y., and Wang, C.C. |
Int. J. of Heat and Mass Transfer |
|
2006 |
Performance of Nozzle/Diffuser Micro-pump Subject to Parallel and Series Combinations,” |
Yang, K.S., Chen, I.Y., and Wang, C.C. |
Chemical Engineering & Technology |
|
2006 |
Effect of Fin Thickness on the Air-Side Performance of Wavy Fin-and-Tube Heat Exchangers under Dehumidifying Conditions,” |
Kuvannarat T., Wongwises S., and Wang, C.C. |
Int. J. of Heat and Mass Transfer |
|
2006 |
“Effect of the Inlet Location on the Performance of Parallel-channel Cold-plate,” |
Lu, M.C., and Wang, C.C. |
IEEE Transactions on Components & Packaging Technologies |
|
2006 |
“Simultaneous Heat and Mass Transfer Characteristics for Wavy Fin-and-Tube Heat Exchangers under Dehumidifying Conditions,” |
Pirompugd W., Wongwises S., and Wang, C.C. |
Int. J. of Heat and Mass Transfer |
|
2006 |
“Enhancement of Thermal Conductivity With CuO for Nanofluids,” |
Liu, M.S., Lin, Mark C.-C., and Wang, C.C. |
Chemical Engineering & Technology, |
|
2006 |
“An Algorithm for Simulation of the Performance of Air-cooled Heat Exchanger Applications Subject to the Influence of Complex Circuitry,” |
Kuo, M.C., Ma, H.K., Chen, S.L., and Wang, C.C. |
Applied Thermal Engineering |
|