王啟川
狀態 專任教師
姓名 王啟川
電子郵件 ccwang@mail.nctu.edu.tw
聯絡電話 886-3-5712121 Ext.55105
職 稱 講座教授
聯絡電話 886-3-5712121 Ext.55105
辦公室 工程五館474室
個人網站 http://scholar.google.com/citations?user=QlIdSPIAAAAJ&hl=en
實驗室 工程五館305室 (分機:55172),熱與能源管理實驗室
組別 能源與熱流組、微奈米工程組
授課領域 1. 電子散熱熱管理(Electronic Cooling – 氣冷、水冷、特殊熱管、LED散熱、機櫃機房散熱與  能源管理)、
2. 熱系統設計與能源系統應用管理(Thermal system design – ORC 系統、  冷凍空調系統、工業用大型散熱系統、海水淡化..)、
3. 熱交換器設計開發 (Heat exchangers design –氣側與管側性能改善研究開發包含鰭管式、  殼管式、板式、密集式熱交換器軟硬體設計
分析開發..)、 4. 微細熱流控制技術 (Micro-scale Heattransfer, and Control – 微通道單相與兩相散熱技術)、
5. 熱傳增強技術 (Heat transfer augmentation, passive and active techniques –  主動式與被動式熱傳增強技術)、
6. 兩相流 (Two-phase flow and heat transfer – 兩相流體分流與控制、兩相熱質傳、  摩差與流譜特性研究)、
7. 非傳統流體機械(Pump, compressor, and fan – EHD pump, ionic fan, piezo fan,  synthetic jet …)
研究專長 - 電子散熱、雲端運算能源管理、海水淡化、非傳統流體機械開發與應用、冷凍空調、 超臨界流體系統與熱交換器(軟硬體)、LED散熱、
微通道熱流設計(單、雙相流體應用)
- 辦公室與實驗室: . 辦公室 (工程五館 474室[分機:55105]) . 實驗室 (工五館550室[分機:55247]、工五館 508室[分機:55227]、
工五館509室[分機:55213]、工五館305室 [分機:55172]); 工五館520室 (雲端能源管理實驗室)
國家 學校名稱 系所 學位 期間
台灣 國立交通大學 機械工程研究所 博士 1984.09 ~ 1989.06
台灣 國立交通大學 機械工程研究所 碩士 1982.09 ~ 1984.06
台灣 國立交通大學 機械工程系 學士 1978.09 ~ 1982.06
服務機關名稱 單位 職務 期間
國立交通大學 機械工程系 教授 2010.02 ~ 迄今
工業技術研究院 能源與資源研究所 資深正研究員 2005.07 ~ 2010.01
美國加州大學柏克萊分校 機械工程系 Visiting Industrial Fellow 2003.06 ~ 2003.12
工業技術研究院 能源與資源研究所 正研究員 1998.01 ~ 2005.06
工業技術研究院 能源與礦業研究所 研究員 1989.10 ~ 1997.12
年度 計畫名稱 參與人 職稱/擔任之工作 計畫期間 補助/委託或合作機構
2013 殼管式預熱器性能模式研究分析與最佳化煙道取熱技術 王啟川 主持人 2013.07 ~ 2013.07 工研院
2013 高壓系統下通電直熱複合之吸脫附元件之最適化構型研究 王啟川 主持人 2013.04 ~ 2013.11 工研院
2013 HFO-1234yf 熱力循環系統模擬軟體開發 (I) 王啟川 主持人 2013.01 ~ 2013.12 國科會
2013 SiC功率模組高效能微流散熱技術 王啟川 主持人 2013.01 ~ 2013.12 工研院
2012 二氧化碳熱泵系統模擬分析軟體建構 王啟川 主持人 2012.03 ~ 2012.11 工研院
2012 熱電發電系統及熱交換器開發 王啟川 主持人 2012.03 ~ 2012.11 工研院
2012 貨櫃機房冷卻性能分析 王啟川 主持人 2012.03 ~ 2012.06 工研院
2012 高壓複合吸附元件熱質傳分析 王啟川 主持人 2012.03 ~ 2012.11 工研院
2012 二氧化碳板式熱交換器設計軟體開發(II) 王啟川 主持人 2012.01 ~ 2012.12 國科會
2012 EHD結構製備與其在LED散熱應用(2/2) 王啟川 主持人 2011.10 ~ 2012.09 國科會
2011 二氧化碳板式熱交換器設計軟體開發(I) 王啟川 主持人 2011.12 ~ 2011.12 國科會
2011 HFE-7100微通道熱沉應用於高性能散熱模組研究 王啟川 主持人 2011.08 ~ 2014.07 國科會
2010 研究計畫 (2010.2 交大到職後執行之計畫..) 王啟川 2011.03 ~ 2011.03
2010 產學合作計畫--EHD結構製備與其在LED散熱應用(1/2) 王啟川 計畫主持人 2010.09 ~ 2011.08 國科會
2010 大管徑波浪型鰭管式熱交換器空氣側性能研究 王啟川 計畫主持人 2010.03 ~ 2011.07 國科會
年度 論文名稱 全部作者 期刊名稱 期數
2021 王啟川老師於科技部論文清單參考連結
2015 Response of a 50 kW Organic Rankine Cycle System Subject to Influence of Evaporators Lee, Y.R., Kuo, C.R., Liu, C.H., Cheng, P.Y., Fu, B.R., and Wang*, C.C Energy Procedia
2015 Two-phase Pressure Drops and Flow Pattern Observations in 90 degree Bends Subject to Upward, Downward and Horizontal Arrangements Hsu, L.J., Chen, I.Y., Chyu, C.M., and Wang*, C.C. Experimental Thermal and Fluid Science
2015 Parametric Study on Thermal Performance of Microchannel Heat Sinks with Internal Vertical Yshaped Bifurcations Xie*, G., Shen, H., and Wang*, C.C. Int. J. of Heat and Mass Transfer
2015 Review on CO2 Heat Pump Water Heater for Residential Use in Japan Zhang, J.F., Qin, Y., and Wang*, C.C. Renewable & Sustainable Energy Reviews
2015 Performance of Bare-tube Bundle Having Small Diameter Tube: With and Without Partial Bypass Chang, N.C., Li, C.J., and Wang*, C.C., Int. Communications in Heat and Mass Transfer
2015 Performance Improvement of High Power Liquid-cooled Heat Sink Via Non-uniform Metal Foam Arrangement Chen, K.C., and Wang*, C.C. Applied Thermal Engineering
2015 Performance of Piezoelectric Fins for Heat Dissipation Sheu, W.J., Chen, G.J. and Wang*, C.C Int. J. of Heat and Mass Transfer
2015 The New Mathematical Models for Plain Fin-and-Tube Heat Exchangers With Dehumidification Pirompugd, W., Wang, C.C., and Wongwises, S. J. of Heat Transfer
2015 An Experimental Study of Inclination on the Boiling Heat Transfer Characteristics of a 440 um Micro-Channel Heat Sink Using HFE-7100 Hsu, L.C., Cion, S.W., Lin, K.W., and Wang*, C.C. Int. Communications in Heat and Mass Transfer
2015 Effect of Pressure on the Moisture Adsorption of Silica Gel and Zeolite 13X Adsorbents Lee, Y.C., Weng, L.C., Tseng, P.C., and Wang*, C.C. Heat and Mass Transfer
2015 Effect of Driven Frequency on Flow and Heat Transfer of Impinging Synthetic Air Jet Liu*, Y.H., Tsai, S.Y., and Wang, C.C Applied Thermal Engineering
2015 Performance and Flow Distribution of the Plate Heat Exchanger With Supercritical Fluid of Carbon Dioxide Zhu, C.X., Tang, Y.C., and Wang*, C.C Journal of Thermal Engineering
2015 An Experimental Study of the Air-side Performance of Fin-and-tube Heat Exchangers Having Plain, Louver, and Semi-dimple Vortex Generator Configuration Wang*, C.C., Chen, K.Y., Liaw, J.S., and Tseng, C.Y. Int. J. of Heat and Mass Transfer
2014 System Performance of R-1234yf Refrigerant in Air-conditioning and Heat Pump System – An Overview of Current Status Wang*, C.C Applied Thermal Engineering
2014 A Novel Heat Dissipation Fin Design Applicable for Natural Convection Augmentation Charles, R., and Wang*, C.C. Int. Communications in Heat and Mass Transfer
2014 A Co-axial Multi-tube Heat Exchanger Applicable for a Geothermal ORC Power Plant Hsieh, J.C., Lee, Y.R., Guo, T.R., Liu, L.W., Cheng, P.Y., and Wang*, C.C. Energy Procedia
2014 Influence of electrode configuration on the heat transfer performance of a LED heat source Chen, I.Y., Chen, C.J., and Wang*, C.C. Int. J. of Heat and Mass Transfer
2014 Performance and two-phase flow pattern for micro flat heat pipes Yang, K.S., Lin, C.C., Shyu, J.C., Tseng, C.Y., and Wang*, C.C. Int. J. of Heat and Mass Transfer
2014 Effect of Partial Bypass on the Heat Transfer Performance of Dehumidifying Coils Wang*, C.C., Cheng, Y.C., Liaw, J.S., and Tseng, C.Y. Int. Communications in Heat and Mass Transfer
2014 Scale Effect on Dropwise Condensation on Superhydrophobic Surfaces Lo, C.W., Wang, C.C., and Lu*, M.C. ACS Applied Materials & Interfaces 16
2014 Dynamic Response of a 50 kW Organic Rankine Cycle System in Association With Evaporators Lee, Y.R., Kuo, C.R., Liu, C.H., Fu, B.R., and Wang*, C.C. Energies
2014 Spatial Control of Heterogeneous Nucleation on the Superhydrophobic Nanowire Array Lo, C.W., Wang, C.C., and Lu*, M.C. Advanced Functional Materials 9
2014 Performance Evaluation of a Tube-in-tube CO2 Gas Cooler Used in a Heat Pump Water Heater Yu, P.Y., Lin W.K. and Wang*, C.C. Experimental Thermal and Fluid Science
2014 Influence of Lubricant on the Nucleate Boiling Heat Transfer Performance of Refrigerant – a Review Wang*, C.C., Hafner, A., Kuo, C.S., and Hsieh, W.D. Heat Transfer Engineering 6-8
2014 Investigation of the Performance of Pulsating Heat Pipe Subject to Uniform/Alternating Tube Diameters Tseng, C.S., Yang, K.S., Chien, K.H., Jeng, M.S., and Wang*, C.C. Experimental Thermal and Fluid Science
2013 Modeling and Simulation of the Transcritical CO2 Heat Pump System Lin, K.H., Kuo, C.S., Hsieh, W.D. and Wang*, C.C. Int. J. of Refrigeration
2013 A Visual Observation of the Air Flow Pattern for the High Speed Nozzle Applicable to High Power Laser Cutting and Welding Tseng,C.S., Chen, C.M., and Wang*, C.C. Int. Communications in Heat and Mass Transfer
2013 An Experimental Study on the Heat Dissipation of LED Lighting Module Using Metal/Carbon Foam Yang, K.S., Chung, C.H., Lee, M.T., Chiang, S.B., Wong, C.C., and Wang*, C.C. Int. Communications in Heat and Mass Transfer
2013 Simulation of Velocity Distribution and Pressure Drop in Every Channel in the Printed Circuit Heat Exchanger Lo*, H.P., Hung, C.H., and Wang, C.C. ECS Transactions 1
2013 Investigation of the two-phase convective boiling of HFO-1234yf in a 3.9 mm diameter tube Lu, M.C., Tong, J.R., and Wang*, C.C. Int. J. Heat and Mass Transfer
2013 Effect of oscillatory EHD on the heat transfer performance of a flat plate Sheu, W.J., Hsiao, J.J., and Wang*, C.C. Int. J. of Heat and Mass Transfer
2013 Effect of Non-uniform Heating on the Performance of the Microchannel Heat Sinks Liu, C.K., Yang, S.J., Chao, Y.L., Liu, K.Y., and Wang*, C.C. Int. Communications on Heat and Mass Transfer 43
2013 Orientation Effect on Heat Transfer of a Shrouded LED Backlight Panel With a Plate-fin Array Shyu, J.C., Hsu, K.W., Yang, K.S., and Wang*, C.C. Int. Communications on Heat and Mass Transfer
2013 On Studying Fluidic Motions in an Oscillating Heat Pipe Chen, H.M., Chiang, C.M., Chien, K.H., Wang*, C.C. Applied Mechanics and Materials
2013 Enhanced Cooling for LED lighting Using Ionic Wind Chen, I.Y., Kuo, M.Z., Yang, K.S., Wang*, C.C. Int. J. of Heat and Mass Transfer
2013 An Overview for the Heat Transfer Performance of HFO-1234yf Wang*, C.C. Renewable & Sustainable Energy Reviews
2012 Transient Response of a 50 kW Organic Rankine Cycle System Lee, Y.R., Kuo, C.R., and Wang*, C.C Energy
2012 Performance of a tube-in-tube CO2 gas cooler Yu, P.Y., Lin, K.H., Lin, W.K., and Wang*, C.C. Int. J. of Refrigeration
2012 A Novel Design of Pulsating Heat Pipe With Fewer Turns Applicable to All Orientations Chien, K.H., Lin, Y.T., Chen, Y.R., Yang, K.S., and Wang*, C.C. Int. J. of Heat and Mass Transfer
2012 Enhanced Heat Transfer Performance of Air-cooled HeatExchangers Using ’Partial Bypass’ Concept Wang, C.C. Heat Transfer Engineering,
2012 Theoretical study of oscillatory phenomena in a horizontal closed-loop pulsating heat pipe with asymmetrical arrayed minichannel Chiang, C.C., Chien, K.H., Chen, H.M., Wang*, C.C. Int. Communications in Heat and Mass Transfer
2012 An Overview of the Effect of Lubricant on the Heat Transfer Performance on Conventional Refrigerants and Natural Refrigerant R-744 Wang*, C.C., Hafner, A., Kuo, C.S., and Hsieh, W.D. Renewable and Sustainable Energy Reviews
2012 A Novel ’Partial Bypass’Concept to Augment Performance of Air-cooled Heat Exchangers Wang*, C.C., Chen, K.Y., Liaw, J.S., and Tseng J.Y. Int. J. of Heat and Mass Transfer
2012 A Comparative Study of Nozzle/Diffuser Micropumps with Novel Valves Yang, K.S., Chao, T.F., Chen, I.Y., Wang*, C.C., Shyu, J.C. Molecules
2012 Air-side performance of herringbone wavy fin-and-tube heat exchangers under dehumidifying condition – Data with larger diameter tube Wang*, C.C., Liaw, J.S. Int. J. of Heat and Mass Transfer
2012 Effect of Number of Tube Rows on the Air-side Performance of Crimped Spiral Fin-and-tube Heat Exchanger With a Multipass Parallel and Counter Cross-flow Configuration Pongsoi, P., Pikulkajorn, S., Wang, C.C., and Wongwises, S. Int. J. of Heat and Mass Transfer
2012 Effect of Inclination on the Convective Boiling Performance of A Microchannel Heat Sink Using HFE-7100 Wang*, C.C., Chang, W.C., Dai, C.H., Lin, Y.T., and Yang, K.S. Experimental Thermal and Fluid Science
2011 A Study of Bubble Venting in a Microchannel With Hydrophobic Nanoporous Membranes Shyu, J.C., Li, S.L., Chen, I.Y., Yang, K.S., Chen, W.S., Chang, S.Y., and Wang, C.C. J. of Flow Visualization and Image Processing
2011 Air-side Performance of Herringbone Wavy Fin-and-tube Heat exchangers – Data With Larger Diameter Tube Wang, C.C., Liaw, J.S., Yang, B.C. Int. J. of Heat and Mass Transfer
2011 A Numerical Investigation of the Geometric Effects on the Performance of Plate Finned-Tube Heat Exchanger Lu, C.W., Huang, J.M., Nien, W.C., and Wang, C.C. Energy Conversion and Management
2011 Heat Transfer and Flow Pattern Characteristics for HFE-7100 Within Microchannel Heat Sinks Yang, K.S., Jeng, Y.R., Huang, C.M., and Wang, C.C. Heat Transfer Engineering No. 7-8
2011 On the Heat Transfer Correlation for Membrane Distillation Wang, C.C. Energy Conversion and Management
2011 Effect of Fin Pitches on the Air-side Performance of Crimped Spiral Fin-and-tube Heat Exchangers With a Multipass Parallel and Counter Cross-flow Configuration Pongsoi, P., Pikulkajorn, S., Wang, C.C., and Wongwises, S. Int. J. of Heat and Mass Transfer
2011 Effect of Cannelure Fin Configuration on Compact Aircooling Heat Sink Wang, C.C., Yang, K.S., Liu, Y.P., and Chen, I.Y. Applied Thermal Engineering
2011 Enhancements of Thermal Conductivities with Cu, CuO and Carbon Nanotube Nanofluids and Application of MWNT/water Nanofluid on a Water Chiller System Liu, M.S., Lin, M. C.C., and Wang, C.C. Nanoscale Research Letters
2011 Thermal Characterization of Shrouded Plate Fin Array on an LED Backlight Panel Shyu, J.C., Hsu, K.W., Yang, K.S., and Wang, C.C., Applied Thermal Engineering
2011 Liquid Flow Distribution Characteristics in Compact Parallel Flow Heat Exchangers, Part I: Typical Inlet Header Wang, C.C., Yang, K.S., Tsai, J.S., and Chen, I.Y. Applied Thermal Engineering
2011 Liquid Flow Distribution Characteristics in Compact Parallel Flow Heat Exchangers, Part II: Modified Inlet Header Wang, C.C., Yang, K.S., Tsai, J.S., and Chen, I.Y. Applied Thermal Engineering
2011 Analysis of a 50 kW Organic Rankine Cycle System Kuo, C.R., Hsu, S.W., Chang, K.H., and Wang, C.C. Energy
2011 The Effect of Ventilation Types on Pollutant Removal in a Large Space Plant with Multiple Pollutant Sources Huang, J.M., Hsu, S.P., Wu, Y.L., Chen, H.Y., and Wang, C.C. Indoor and Built Environment
2011 Recent advances in Fin-and-Tube Heat Exchangers Wang, C.C. Int. J. of Air-Conditioning and Refrigeration, accepted.
2010 Correlations for Wet Surface Ratio of Fin-and-Tube Heat Exchangers Pirompugd, W., Wang, C.C., and Wongwises, S. Int. J. of Heat and Mass Transfer
2010 Water Permeation analysis on gas Diffusion Layer of PEM fuel Cells for Flooding Issue Annotation Chou, Y.I., Shaio, Z.Y., Chen, Y.F., Sung, L.Y., Yang, W.M., and Wang, C.C. J. of Power Sources
2010 Two-phase Flow Across Small Sudden Expansions/Contractions Chen, I.Y., Wongwises, S., Yang, B.C., and Wang, C.C Heat Transfer Engineering
2010 Airside Performance of Fin-and-tube Heat Exchangers in Dehumidifying Conditions – Data With Larger Diameter Liu, Y.C., Wongwises, S., Chang, W.J., and Wang, C.C. Int. J. of Heat and Mass Transfer
2010 Influence of Inlet Configurations on the Refrigerant Distribution of a Dual Cold-plate System Yang, K.S., Yu, K.H., Chen, I.Y., and Wang, C.C. Heat Transfer Engineering
2010 Effect of Passive Flow Deflector on the Flux Improvement in Direct Contact Membrane Distillation Liu, C.L., Chen, Y.F., Sheu, W.J., and Wang, C.C. Desalination
2010 Surface Modification of Nano-Porous Anodic Alumina Membranes and Its Use in Electroosmotic Flow Chen, Y.F., Hu, Y.H., Chou, Y.I., Lai, S.M., and Wang, C.C. Sensors and Actuators, Part B, Chemical
2010 A Novel Condensate-free Refrigerated Cold Plate for Electronic Cooling Wu, Y.L., Yang, K.S., Chen, M.Y., and Wang, C.C. Int. J. of HVAC&R Research No. 1
2010 “An Investigation of a Top-mounted Domestic Refrigerator,” Yang, K.S., Chang, W.J., Chen, I.Y., and Wang, C.C. Energy Conversion and Management
2010 “On the Heat Transfer Characteristics of Heat Sinks: With and Without Vortex Generators,” Yang, K.S., Jhong, J.H., Lin, Y.T., Chien, K.H., and Wang, C.C. IEEE Transactions on Components & Packaging Technologies
2010 “Investigation of Bubble Effect in Microfluidic Fuel Cells by a Simplified Microfluidic Reactor,” Shyu, J.C., Lee, C.J., Wei, C.S., and Wang, C.C. Applied Thermal Engineering
2010 “A Survey of Recent Patents of Fin-and-Tube Heat Exchangers From 2001~2009,” Wang, C.C. Int. J. of Air-Conditioning and Refrigeration no. 1
2010 “A New Correlation and the Review of Two-phase Flow Pressure Change Across Sudden Expansion in Small Channels,” Wang C.C., Tseng, C.Y., and Chen, I.Y. Int. J. of Heat and Mass Transfer
2010 “Novel No-moving-part Valves for Microfluidic Devices,” Yang, K.S., Liu, Y.H., Wang, C.C., and Shyu, J.C. Microsystem Technology
2010 “An Experimental Study of air Cooling Thermal Module Using Various Enhancements at low Reynolds Number Region,” Yang, K.S., Li, S.L., Chen, I.Y., Chien, K.H., Hu, R., and Wang, C.C. Int. J. of Heat and Mass Transfer
2009 “Two-phase Flow Pressure Change Subject to Sudden Contraction in Small Rectangular Channels,” Chen, I.Y., Tseng, C.Y., Lin, Y.T., and Wang, C.C. Int. J. of Multiphase Flow
2009 “Two-phase Flow Pattern and Frictional Performance Across Small Rectangular Channels,” Chen, I.Y., Chen, Y.M., Yang, B.C., and Wang, C.C. Applied Thermal Engineering
2009 “A Review on Reduction Method for Heat and Mass Transfer of Fin-and-Tube Heat Exchangers Under Dehumidifying Conditions,” Pirompugd, W., Wang, C.C., and Wongwises, S. Int. J. of Heat and Mass Transfer
2009 “Heat Transfer by a Piezoelectric Fan on a Flat Surface Subject to the Influence of Horizontal/Vertical Arrangement,” Liu, S.F., Huang, R.T., Sheu, W.J., and Wang, C.C. nt. J. of Heat and Mass Transfer
2009 “Effect of Variable Heating Load on the Refrigerant Distribution of a Dual Cold-plate System,” Tien, C.W., Sheu, W.J., Yu, K.H., and Wang, C.C. ASME J. of Electronic Packaging
2009 “Heat Transfer Enhancement by Needle-Arrayed Electrodes - An EHD Integrated Cooling System,” Sheu, W.J., Huang, R.T., and Wang, C.C. Energy Conversion and Management
2009 “Numerical Simulation of a Heat Sink Embedded with a Vapor Chamber and Calculation of Effective Thermal Conductivity of a Vapor Chamber,” Chen, Y.S., Chien, K.H., Ferng, Y.M., Wang, C.C., Hung, T.C., and Pei, B.S. Applied Thermal Engineering
2009 “Experiments on the Power Consumption Comparison Between a Constant Speed Air-conditioner and a Variable Speed Air-conditioner,” Chen, I.Y., Chen Y.M., Chang, Y.J., Wei, C.S., and Wang C.C. ASHRAE Transactions Part 1
2009 “System Augmentation of an Air-cooled Chiller Using Nanofluids,” Liu, M.S., Lin, M. C.C., Hu, R., Liaw, J.S., and Wang, C.C. ASHRAE Transactions Part 1
2009 “A Comparative Study of an Open Vertical Refrigerated Multi-Deck – A Numerical Study and its Experimental Validation,” Chen, Y.F., Lin, H.W., Hsieh, W.D., Lin, J.Y., and Wang, C.C. ASHRAE Transactions Part 2
2008 “Study on Pd Functionalization of Microcantilever for Hydrogen Detection Promotion,” Chou, I.Y., Chiang, H.C., and Wang, C.C. Sensors and Actuators, Part B, Chemical
2008 “The Effects of Frost Thickness on the Heat Transfer of Finned Tube Heat Exchanger Subject to the Combined Influence of Fan Type,” Huang, J.M., Hsieh, W.C., Ke, X.J., and Wang, C.C. Applied Thermal Engineering
2008 “On the Heat and Mass Analogy of Fin-and-Tube Heat Exchanger,” Wang, C.C. Int. J. of Heat and Mass Transfer,
2008 “Two-phase Frictional Pressure Drop Measurements in U-type Wavy Tubes Subject to Horizontal and Vertical Arrangements,” Chen, I.Y., Wu, Y.S., Hu, R., and Wang, C.C. Applied Thermal Engineering
2008 “Effect of Orientation on the Natural Convective Performance of Square pin fin Heat Sinks,” Huang, R.T., Sheu, W.J., and Wang, C.C. Int. J. Heat and Mass Transfer,
2008 “Performance of Nozzle/Diffuser Micro-pump: A Numerical Examination,” Yang, K.S., Chen, I.Y., and Wang, C.C. J. of Mechanical Engineering Science
2008 “Sensible Airside Performance of Fin-and-tube Heat Exchangers – Data With Larger Diameter Tube,” Liu, Y.C., Hu, R., Yang, B.C., Chen, I.Y., and Wang, C.C. ASHRAE Transactions 1
2008 “Finite Circular Fin Method for Wavy Fin-and-Tube Heat Exchangers under Fully and Partially Wet Surface Conditions,” Pirompugd, W., Wang, C.C., and Wongwises, S., Int. J. of Heat and Mass Transfer
2008 “Low-voltage Electroosmotic Pumping Using Porous Anodic Alumina Membranes,” Chen, Y.F., Li, M.C., Hu, Y.S., Chang, W.J., and Wang, C.C. Microfludics and Nanofludics,
2008 “Two-phase Flow Characteristics Across Sudden Contraction in Small Rectangular Channels,” Chen, I.Y., Chu, M.C., Liaw, J.S. and Wang, C.C. Experimental Thermal and Fluid Science
2008 “Extending the Limit of Direct Air-cooling Heat Sink,” Wang, C.C. Heat Transfer Engineering 11
2008 “A Visual Observation of the Air-water Two-phase Flow in Small Diameter Tubes Subject to the Influence of Vertical Return Bends,” Wang, C.C., Chen, I.Y., Lin, Y.T., Chang. Y.J. Chemical Engineering Research and Design,
2008 “Influence of Bonding Glues on the Vibration of Piezoelectric Fans,” Huang, R.T., Sheu, W.J., and Wang, C.C. Sensors and Actuators, Part A, Physical,
2008 “Detection of PB2+ Ions Using Carboxyl-functionalized Microcantilever Sensor,” Chou, Y.I., Wang, C.C., Wu, C.Y., Hsu, K.S., Chiang, H., and Lai, S.M. Sensor Letters
2007 “Effect of Inclination Angle on Free Convection Thermal Performance of Louver Fin and Tube Heat Exchanger,” Nuntaphan, A., Vitayasai, S., Kiatsiriroat, T., and Wang, C.C. Int. J. of Heat and Mass Transfer
2007 “Finite Circular Fin Method for Heat and Mass Transfer Characteristics for Plain Fin-and-Tube Heat Exchangers under Fully and Partially Wet Surface Conditions,” Pirompugd, W., Wang, C.C., and Wongwises, S. Int. J. of Heat and Mass Transfer
2007 “Two-Phase Frictional Pressure Drop of R-134a and R-410A Refrigerant-oil Mixtures in Straight Tubes and U-type Wavy Tubes,” Chen, I.Y., Wu, Y.S., Chang, Y.J., and Wang, C.C. Experimental Thermal and Fluid Science,
2007 ““On the Heat Transfer Characteristics of Heat Sinks: Influence of fin Spacing at low Reynolds Number Region,” Yang, K.S., Chiang, C.M., Lin, Y.T., Chien, K.H., and Wang, C.C, Int. J. of Heat and Mass Transfer
2007 “Heat and Mass Transfer Characteristics for Finned Tube Heat Exchangers with Humidification,” Pirompugd, W., Wang, C.C., and Wongwises, S. AIAA J. of Thermophysics and Heat Transfer
2007 “Numerical Investigation of the Intercooler of Two-Stage Refrigerant Compressor,” Huang, J.M., Chiang, C.P., Chen, J.F., Chow, Y.L., and Wang, C.C. Applied Thermal Engineering
2007 “A PIV Investigation of the Flow Mal-distribution in Multi-Channel Cold-plate Subject to Inlet Locations,” Liu, M.X., Sheu, W.J., Chiang, S.B., and Wang, C.C J. of Enhanced Heat Transfer
2007 “Numerical and Experimental Investigations of the Thermal Spreading Effects of Rectangular Conduction Plates and Vapor Chamber,” Chen, Y.S., Chien, K.H., Ferng, Y.M., Wang, C.C., Hung, T.C., and Pei, B.S. ASME J. of Electronic Packaging,
2007 “A Fully Wet and Fully Dry Tiny Circular Fin Method for Heat and Mass Transfer Characteristics for Plain Fin-and-Tube Heat Exchangers under Dehumidifying Conditions,” Pirompugd, W., Wang, C.C., and Wongwises, S. ASME J. of Heat Transfer,
2007 “Two-phase Frictional Pressure Drop in Small Rectangular Channels,” Chen, I.Y., Chen, Y.M., Liaw, J.S., and Wang, C.C Experimental Thermal and Fluid Science
2007 “A Review of Fin-and-Tube Heat Exchangers in Air-conditioning Applications,” Hu, R., and Wang, C.C. Int. J. of Air-Conditioning and Refrigeration, 3
2007 “A Comparative Study of the Airside Performance of Heat Sinks Having Pin Fin Configurations,” Yang, K.S., Chu, W.S., Chen, I.Y., and Wang, C.C. Int. J. of Heat and Mass Transfer
2007 “Microcantilever Pb2+ Sensor Using Re-Supramolecular Functionalization with Crown-Ether-Like Recognition Site,” Lai, S.M., Wu,C.Y., Hsu, K.S., Wang, C.C., Chiang, H.C., Lu, K.L., and Chou, I.Y. Electrochemical and Solid-State Letters 12
2007 “Two-phase Flow Characteristics Across Sudden Expansion in Small Rectangular Channels,” Chen, I.Y., Liu, C.C., Chien, K.H., and Wang, C.C. Experimental Thermal and Fluid Science
2006 A Mechanical-Electrokinetic Battery by Using Nano-porous Membrane,” Lu, M.C., Satyanarayana, S., Karnik, R., Majumdar A., and Wang, C.C. J. of Micromechanics and Microengineering
2006 “An Algorithm for Simulation of the Performance of Air-cooled Heat Exchanger Applications Subject to the Influence of Complex Circuitry,” Kuo, M.C., Ma, H.K., Chen, S.L., and Wang, C.C. Applied Thermal Engineering
2006 “Enhancement of Thermal Conductivity With CuO for Nanofluids,” Liu, M.S., Lin, Mark C.-C., and Wang, C.C. Chemical Engineering & Technology,
2006 “Simultaneous Heat and Mass Transfer Characteristics for Wavy Fin-and-Tube Heat Exchangers under Dehumidifying Conditions,” Pirompugd W., Wongwises S., and Wang, C.C. Int. J. of Heat and Mass Transfer
2006 “Effect of the Inlet Location on the Performance of Parallel-channel Cold-plate,” Lu, M.C., and Wang, C.C. IEEE Transactions on Components & Packaging Technologies
2006 Effect of Fin Thickness on the Air-Side Performance of Wavy Fin-and-Tube Heat Exchangers under Dehumidifying Conditions,” Kuvannarat T., Wongwises S., and Wang, C.C. Int. J. of Heat and Mass Transfer
2006 Performance of Nozzle/Diffuser Micro-pump Subject to Parallel and Series Combinations,” Yang, K.S., Chen, I.Y., and Wang, C.C. Chemical Engineering & Technology
2006 Enhancement of Thermal Conductivity With Cu for Nanofluids Using Chemical Reduction Method,” Liu, M.S., Lin, M. C.C., Tsai, C.Y., and Wang, C.C. Int. J. of Heat and Mass Transfer
2006 “Corrigendum to “Simultaneous Heat and Mass Transfer Characteristics for Wavy Fin-and-tube Heat Exchangers Under Dehumidifying Conditions” Pirompugd W., Wongwises S., and Wang, C.C. Int. J. of Heat and Mass Transfer
2006 “A Simplified Transient Three-dimensional Model for Estimating the Thermal Performance of the Vapor Chambers,” Chen, Y.S., Chien, K.H., Wang, C.C., Hung, T.C., and Pei, B.S. Applied Thermal Engineering,
2006 “Flow Patterns of Two-Phase Flow in Vertical U-Type Return Bends,” Wongwises S., Kamsanam, W., and Wang, C.C. AIAA J. of Thermophysics and Heat Transfer
2006 “An Amendment of the Generalized Friction Correlation for Louver Fin Geometry,” Chang, Y.J., Chang, W.J., Li, M.C., and Wang, C.C. Int. J. of Heat and Mass Transfer
2006 Analysis of Micro Diffuser/Nozzle,” Yang, K.S., Liu, M.S., Chen, I.Y., and Wang, C.C. J. of Mechanical Engineering Science,
2006 “Distribution of Two-phase Flow Across 2.7 mm Vertically Split U-type Junctions,” Chen, I.Y., Tsai, C.W., Yang, B.C., Wang, C.C. Chemical Engineering & Technology No. 10
2006 “Visual Observation of Two-phase Flow Across Vertically Split U-type Junctions,” Chen, I.Y., Tsai, C.W., Hu, R., Wang, C.C. J. of Flow Visualization and Image Processing
2006 “A Review of Single-phase and Two-phase Flow Characteristics in U-type Return Bends,” Chen, I.Y. and Wang, C.C Trends in Heat and Mass Transfer
年度 論文名稱 全部作者 會議名稱 地點
2011 Orientation Effect on the Convective Boiling performance of a Microchannel Heat Sink Wang, C.C., Chang, W.J., Dai, C.H., and Yang, K.S. the 4th International Conference on HEAT TRANSFER and FLUID FLOW in MICROSCALE HTFFM-IV Fukuoka, Japan
2011 Recent advances in Fin-and-Tube Heat Exchangers Wang, C.C International Conference on Air-Conditioning & Refrigeration 2011 Yongpyong Resort, Gangwon-Do, KOREA
2011 Liquid Flow Distribution in Compact Parallel Flow Heat Exchangers Chen, I.Y., Tsai, J.S., Wang, C.C. and Yang, K.S. The 2011 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2011) Bali, Indonesia
2011 Performance of Tube in Tube Heat Exchanger with Supercritical CO2 Fluid Lin, K.H., Wang, C.C., and Yu, S. The 2011 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2011)
2010 Experimental Investigation of High Performance Thermal Module with Dimple Vortex Generators Yang, K.S., Wun, K.L., Chen, I.Y., and Wang, C.C. IMPACT 2010 (International Microsystems, Packaging, Assembly, and Circuits Technology Conference) Taipei, Taiwan
2010 Performance of the LED Array Panel in a Confined Enclosure Shyu, J.C., Hsu, K.W., Yang, K.S., and Wang, C.C. IMPACT 2010 (International Microsystems, Packaging, Assembly, and Circuits Technology Conference) Taipei, Taiwan
2010 Airside Performance of Wavy Fin-and-Tube Heat Exchangers – Data With Larger Diameter Tube Lo, H.P., Hung, C.H., and Wang, C.C. 14th International Heat Transfer Conference Washington, D.C., USA
2010 Analysis and Optimum for Air Cooling Thermal Module Using Dimple Vortex Generators Yang, K.S., Chen, I.Y., Wang, C.C., and Li, S.L. 14th International Heat Transfer Conference Washington, D.C., USA
2010 On the Heat Transfer Characteristics of Highly Compact Heat Sinks Wang, C.C. 8th International Conference on Nanochannels, Microchannels and Minichannels Montreal, Canada
2010 Experimental Studies of Nozzle/Diffuser Micropumps Using Enhancement Structure Yang, K.S., Chao, T.F., Chen, I.Y., and Wang, C.C. 8th International Conference on Nanochannels, Microchannels and Minichannels Montreal, Canada
2010 Two-phase Flow Pressure Change Across Sudden Expansion in Small Channels Chen, I.Y., Tseng, C.Y., and Wang, C.C. 7th International Conference on Multiphase Flow Tampa, FL USA
2010 Measurement and Visualization of Bubble Venting in Microchannels With a Nanoporous Membrane Shyu, J.C., Dai, S.M., Yang, S.A., Yang, K.S., and Wang, C C. Asia-Pacific Conference of Transducers and Micro-Nano Technology Perth, Australia
2010 Characterization of Thermal Performance Induced by Piezoelectric Fans Shyu, J.C., Hsu, K.W., and Wang, C C. Asia-Pacific Conference of Transducers and Micro-Nano Technology Perth, Australia
2009 A Numerical Simulation and Analysis of a Top-mounted Domestic Refrigerator Yang, K.S., Chang, W.R., Chen, I.Y., and Wang, C.C. 10th Asia Pacific Conference on Built Environment Kaohsiung, Taiwan
2009 An Investigation of Thermal Spreading Device With Thermal Via in High Power LEDs Yang, K.S., Wu, Y.L., Chen, I.Y., and Wang, C.C. IMPACT 2009 (International Microsystems, Packaging, Assembly, and Circuits Technology Conference), Taipei, Taiwan
2009 Effect of Orientation on the Convective Boiling Performance of Microchannel Heat Sink Using HFE-7100 Yang, K.S., Jeng, Y.R., Huang, C.M., and Wang, C.C. IMPACT 2009 (International Microsystems, Packaging, Assembly, and Circuits Technology Conference) Taipei, Taiwan
2009 Research and Development in no-moving-part Valves Using Enhancement Yang, K.S., Liu, Y.C., Wang, C.C., and Shyu, J.C. 7th International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM2009) Pohang, Korea
2009 Heat Transfer and Pressure Drop Characteristics for HFE-7100 Within Microchannel Heat Sink Huang, C.M., Jeng, Y.R., Yang, K.S., and Wang, C.C. 7th International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM2009) Pohang, Korea
2009 A Condensate-Less Design of Cold Plate in Vapor-compression System Applicable to High-end Computing Wu, Y.L., Yang, K.S., Lin, S.J., Wang, C.C. the 25th Semi-Therm Conf. The Fairmont Hotel, San Jose, California USA
2009 An Experimental Study and Flow Visualization of the Bubble Venting in a Microchannel With a Hydrophobic Nanoporous Membrane Shyu, J.C., Yang, K.S., Chen, W. S., Chang, S. Y., and Wang, C. C. 6th Pacific Symposium on Flow Visualization and Image Processing Kaohsiung, Taiwan
2008 Study of Performance Enhancement for Water Chiller System With Carbon Nanotube Nanofluid Liu, M.S., Lin, M. C.C., and Wang, C.C. 2008 International Symposium on Nano Science and Technology Tainan, TAIWAN
2008 “Effects of Variable Heating Load on the Refrigerant Distribution, and Two-phase Pressure Drop of a Dual Cold-plate System” Yu, K.H., Chen, I.Y., Yang, K.S., and Wang, C.C. 7th International Symposium on Heat Transfer (ISHT7’08) Beijing, China
2008 “Two-phase Heat Transfer Performance of HFE-7100 in Parallel Microchannel Heat Sink” Yang, W.M., Hong, G.Y., Yang, S.Y., Shyu, R.J., and Wang, C.C. HEAT 2008, Fifth International Conference on Transport Phenomena In Multiphase Systems Bialystok, Poland
2008 “Two-phase Pressure Drop Across Sudden Contraction in Small Rectangular Channels” Chen, I.Y., Chu, M.C., Liaw, J.S., and Wang, C.C. HEAT 2008, Fifth International Conference on Transport Phenomena In Multiphase Systems Bialystok, Poland
2008 “Two-phase Flow Across Sudden Expansion/Contractions” Wang, C.C. HEAT 2008, Fifth International Conference on Transport Phenomena In Multiphase Systems Bialystok, Poland
2008 “Influence of Variable Heat Load on the Refrigerant Distribution of a Dual Cold-plate System” Yang, K.S., Yo, K.H., and Wang, C.C. 6th International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM2008) Darmstadt, Germany
2008 “Two-Phase Heat Transfer Performance of Dielectric Fluid HFE-7100 Within Multiport Microchannel” Lin, L.Y., Jeng, Y.R., and Wang, C.C. 1st ASME Micro/Nanoscale Heat Transfer International Conference, MNHT2008, Tainan, Taiwan
2008 “Electroosmotic Pumping Using Porous Anodic Alumina Membranes” Chen, Y.F., Li, M.C., Chang, W.J., Chen, C.B., and Wang, C.C. 1st ASME Micro/Nanoscale Heat Transfer International Conference, MNHT2008 Tainan, Taiwan
2007 “Frictional Performance of Wavy Fin-and-tube Heat Exchangers – Data With Larger Diameter Tube and Deep Tube Row” Chang, Y.C., Yang, B.C., Hu, R.Y.Z., Liu, Y.C., Chen, I.Y., and Wang, C.C. The 9th Asia Pacific Conference on the Built Environment Bangkok, Thailand
2007 “Performance of Plain Fin-and-tube Heat Exchangers – Data With Larger Diameter Tube Under Dehumidifying Conditions” Liaw, J.S., Lin, J.Y.,, Hu, R.Y.Z., Liu, Y.C., Chen, I.Y., and Wang, C.C. The 9th Asia Pacific Conference on the Built Environment Bangkok, Thailand
2007 “Investigations on Airside Performance of Heat Sinks Having Pin Fin Configurations'” Yang, K.S., Chu, W.S., Chen, I.Y., and Wang, C.C. the 23rd Semi-Therm Conf., The Fairmont Hotel, San Jose, California USA
2007 “EHD Enhanced Heat Transfer with Needle-Arrayed Electrodes” Li, H.Y., Huang, R.T., Sheu, W.J., and Wang, C.C. the 23rd Semi-Therm Conf. The Fairmont Hotel, San Jose, California USA
2007 “Detection of PB2+ Ions Using Carboxyl-functionalized Microcantilever Sensor” Lai, S.M., Hsu, K.S., Wu, C.Y., Chiang, H., Chou, Y.I., and Wang, C.C. the ICMAT 2007 Singapore
2007 “Electroosmotic Flow in Cylindrical Nanofluidic Channels” Chen, Y.F., Chen, C.P., Li, M.C., Chien, C.C., and Wang, C.C. the IEEE-NANOMED 2007 Macao
2007 “Two-phase Frictional Pressure Gradient in Small Rectangular Channels” Chen, I.Y., Chen, Y.M., Liaw, J.S., and Wang, C.C. the 2007 UK Heat Transfer Conference
2006 “Enhancement of Thermal Conductivity with Cu, CuO Nanoparticle, and Carbon Nanotube for Nanofluids,” Liu, M.S., Lin, M. C.C., and Wang, C.C., International Workshop on Innovations and Advanced Studies Tainan, Taiwan
2006 “Comparison of Nanofluids Synthesis From Copper to of Carbon Nanotube,” Lin, M. C.C., Liu, M.S., and Wang, C.C., International Symposium on Nano Science and Technology,
2006 Straight and Helical Carbon Nanotube Synthesized From Catalytic Chemical Vapor Deposition Method,” Lin, M. C.C., Liu, M.S., and Wang, C.C., International Symposium on Nano Science and Technology, Tainan, Taiwan
2006 “Frictional Pressure Drops of Two-phase R-134a Flow in Horizontal and Vertical U-type Wavy and Straight Tubes,” Chen, I.Y., Wu, Y.S., Chang, Y.J., and Wang, C.C., in Proceedings of IMECE2006, paper no. IMECE2006-13274
2006 “Supramolecule-functionalized Microcantilever for Toluene Detection,” Chou, I.Y., Wu, C.Y., Wang, C.C., Chiang, C., Lai, S.M., and Lu, K.L., IUMRS-ICA-2006, (IUMRS Int. Conf. in Asia),
2006 “Comparison of Synthesis of Carbon Nanotubes Using Arc Discharge and Catalytic-Chemical Vapor Deposition Methods,” Lin, M. C.C., Liu, M.S., and Wang, C.C., IUMRS-ICA-2006, (IUMRS Int. Conf. in Asia),
2006 The Thermal Management of LED Panel With Heat Pipe and Stacked Fins,” Chiang, S.B., Chien, K.H., Wu, W.L., and Wang, C.C., in Proceedings of the 12th International Symposium on Flow Visualization
2006 “Performance of Fin-and-Tube Heat Exchangers – Frictional Performance of Larger Diameter Configurations,” Huang, R.T., Sheu, W.J., Chang, Y.J., and Wang, C.C. in Proceedings of the 13th Int. Heat Transfer Conference
2006 “Influence of Impingement Flow on the Performance of Plate Heat Sink,” Yang, K.S., Chen, I.Y., Lin, C.Y., and Wang, C.C., in Proceedings of the 13th Int. Heat Transfer Conference,
2006 “Effect of Heat Spreading on the Performance of Heat Sink via Vapor Chamber,” Chen, Y.S., Chien, K.H., Hung T.C., Pei, B.S., and Wang, C.C., in Proceedings of the 13th Int. Heat Transfer Conference,
2006 “On the Heat and Mass Analogy of Fin-and-Tube Heat Exchangers,” Wang, C.C., in Proceedings of the 13th Int. Heat Transfer Conference
2006 A Numerical Investigation of Micro Diffuser-Nozzle Pumps,” Yang, K.S., Yang, B.C., and Wang, C.C., in Proceedings of the Eleventh Asian Congress of Fluid Mechanics
2006 “Two-Phase Frictional Pressure Drop in U-type Wavy Tubes Subject With and Without the Presence of Lubricant Oil,” Chen, I.Y., Wu, Y.S., Hu, R., and Wang, C.C., in Proceedings of the ACRA 2006 Conference
2006 “Performance of Fin-and-Tube Heat Exchangers – Frictional Performance of Larger Diameter Configurations,” Chang, Y.J., Yang, B.C., Wang, C.C., Chen, I.Y., and Liu, Y.C., in Proceedings of the ACRA 2006 Conference
2006 Performance Comparison Between a Constant Speed Air-conditioner and a Variable Speed Air-conditioner,” Chen I.Y., Chen Y.M., Chang, Y.J., Wei C.S., and Wang C.C., in Proceedings of the ASME ATI Conference on Energy: production, distribution and conservation,
2006 Carbon Nanotube Nanofluids of Oil and Water Based for Enhancement of Thermal Conductivity,” Liu, M.S., Lin, Mark C.C., Wang, C.C., n Proceedings of The second International Symposium on Micro & Nano Technology,
2006 Natural Convection Heat Transfer from Square Pin Fin Heat Sinks Subject to the Influence of Orientation,” Huang, R.T., Sheu, W.J., Li, H.Y., Wang, C.C., and Yang, K.S.., In Proceedings of the 22nd Semi-Therm Conf.,
年度 獎項名稱 頒獎單位 類別
2009 美國機械工程師學會會士 (Fellow ASME) 美國機械工程師學會 (ASME) 校外榮譽
2006 美國冷凍空調學會會士 (Fellow ASHRAE) 美國冷凍空調學會 (ASHRAE) 校外榮譽
2020 科技部傑出研究獎 (能源類) 科技部 校外榮譽
2017 科技部傑出研究獎 (能源類) 科技部 校外榮譽
年度 名稱 發表日期 全部作者
2018 Influence of lubricant on the heat transfer performance of refrigerant – a review 2018-01-23 Chi-Chuan Wang
2018 功率模組散熱技術 2018-01-23 王啟川
2018 Airflow management in datacenter 2018-01-23 王啟川
2018 空调换热器低阻高效技术现状及趋 2018-01-23 王啟川
2018 单相、两相传热强化技术及其进展 2018-01-23 王啟川
2018 两相分流对(微通道式和翅片管式)换热器性能影响及改善措施 2018-01-23 王啟川
2016 資料中心熱能管理 - overview & outlook 2016-05-23 王啟川
2013 熱交換設計 - (I) 2013-09-23 王啟川
2013 熱交換設計 - (II) 2013-09-23 王啟川
2013 熱交換設計 - (III) 2013-09-23 王啟川
2013 熱交換設計 - (IV) 2013-09-23 王啟川
2013 熱交換設計 - (V) 2013-09-23 王啟川
2013 高溫熱泵之應用 2013-09-23 王啟川
2012 Liquid Cooling in Datacenter 2012-12-23 Chi-Chuan Wang
2012 CO2 冷凍空調循環系統模擬 2012-11-23 王啟川
2012 R-1234yf 熱流特性簡介 2012-10-23 王啟川
2012 熱與能源管理研究室簡介 - 2012 2012-10-23 王啟川
2012 基礎測量與誤差傳遞分析 2012-09-23 王啟川
2012 資料中心冷卻技術 - 2012 2012-08-23 王啟川
2012 風管設計 2012-05-23 王啟川
2012 小型空調系統設計與平衡 2012-05-23 王啟川
2011 潤滑油對冷媒熱傳性能之影響 2011-10-23 王啟川
2011 角度變化對微通道熱沉性能之影響 2011-09-23 王啟川
2011 交大, 工研院與我 2011-07-23 王啟川
2011 熱交換器熱流設計 2011-04-23 王啟川
2011 如何撰寫科技研究報告 – 基礎篇 2011-04-23 王啟川
2011 不結露之電子散熱冷板 (冷凍系統) 2011-04-23 王啟川
2011 兩相流動流經突縮與突擴之特性研究 2011-04-23 王啟川
2011 密集熱沉空氣側之熱流特性 2011-04-23 王啟川
2011 CO2冷媒技術與應用發展 2011-03-23 王啟川
2011 科技論文寫作經驗談 2011-03-23 王啟川
2011 鰭管式熱交換器近年專利分析 2011-03-23 王啟川
2011 深層海水空調系統 2011-03-23 王啟川
2011 球類運動之氣動力學 2011-03-23 王啟川
2011 氣冷式散熱鰭片技術 2011-03-23 王啟川
2011 水冷式散熱技術 2011-03-23 王啟川