國立陽明交通大學 機械工程學系
| 姓名 | 劉耀先 |
|---|---|
| 電子郵件 | yhliu(at)nctu.edu.tw |
| 聯絡電話 | 886-3-5712121 Ext.55136 |
| 職 稱 | 教授 |
| 聯絡電話 | 886-3-5712121 Ext.55136 |
| 辦公室 | 工程五館464室 |
| 個人網站 | https://sites.google.com/nctu.edu.tw/yhliulab |
| 個人網站 | https://sites.google.com/nctu.edu.tw/yhliulab |
| 實驗室 | 工程五館342室 (分機：55141)，熱傳強化工程實驗室 |
| 組別 | 能源與熱流組 |
| 授課領域 | 熱力學, 熱傳學, 計算機程式, 熱對流, 燃氣輪機冷卻技術, 實驗熱流學 |
| 研究專長 | 1.熱傳強化 (複合式冷卻, 合成噴流冷卻, 薄霧流冷卻…等) 2.熱流量測技術 (液晶, 紅外線熱顯像, 溫度/壓力感應漆, 全域式粒徑儀，粒子影像 測速(PIV), 熱線測速(Hot-wire anemometry )…等) 3.半導體設備熱流分析 (包含CVD流場可視化與其他相關製程設備熱流研究) 4.能源系統 (包含渦輪機冷卻技術, 波浪發電機熱傳研究, SOFC-CHP系統與燃燒器開發…等) |
| 國家 | 學校名稱 | 系所 | 學位 | 期間 |
|---|---|---|---|---|
| 美國 | 德州農工大學 | 機械工程學系 | 博士 | 2005.08 ~ 2008.12 |
| 美國 | 德州農工大學 | 機械工程學系 | 碩士 | 2003.08 ~ 2005.08 |
| 中華民國 | 國立台灣大學 | 機械工程學系 | 學士 | 1998.09 ~ 2002.06 |
| 服務機關名稱 | 單位 | 職務 | 期間 |
|---|---|---|---|
| 國立交通大學 | 機械工程學系 | 副教授 | 2014.08 ~ 迄今 |
| 國立交通大學 | 機械工程學系 | 助理教授 | 2009.08 ~ 2014.07 |
| 國立台灣大學 | 機械工程學系 | 研究助理 | 2002.12 ~ 2003.06 |
| 年度 | 計畫名稱 | 參與人 | 職稱/擔任之工作 | 計畫期間 | 補助/委託或合作機構 |
|---|---|---|---|---|---|
| 2017 | 利用機械與仿生複合式結構增強薄霧冷卻與集水效率 | 劉耀先 | 主持人 | 2017.08 ~ 2018.07 | 科技部 |
| 2016 | 雙光束之環形中心聚焦複合雷射光斑與送粉堆疊空間匹配之沉積率研究 | 劉耀先 | 主持人 | 2016.05 ~ 2016.12 | 工研院 |
| 2016 | IGFC 關鍵材料/製程/零組件及二氧化碳再利用之技術開發(3/3) | 劉耀先 | 共同主持人 | 2016.01 ~ 2016.12 | 科技部 |
| 2016 | 雲端熱管理技術研究(3/3) | 劉耀先 | 共同主持人 | 2016.01 ~ 2016.12 | 科技部 |
| 2015 | 迷你流道中的薄霧流熱傳研究 | 劉耀先 | 主持人 | 2015.08 ~ 2016.07 | 科技部 |
| 2015 | 雷射沉積製程熱傳現象模擬之研究 | 劉耀先 | 主持人 | 2015.05 ~ 2015.12 | 工研院 |
| 2015 | 超音波霧化之流體與熱傳增強研究 | 劉耀先 | 主持人 | 2014.08 ~ 2015.07 | 科技部 |
| 2012 | 輻射熱能與波浪運動對波浪發電機組性能之影響研究 | 劉耀先 | 主持人 | 2013.01 ~ 2013.12 | 國科會 |
| 2012 | 具高熱通量元件流道內之薄霧流熱傳增強研究 | 劉耀先 | 主持人 | 2012.08 ~ 2014.07 | 國科會 |
| 2012 | 波浪發電機組散熱冷卻系統之設計與分析 | 劉耀先 | 主持人 | 2012.04 ~ 2012.11 | 工研院 |
| 2011 | 退火爐內基板溫均勻性，熱應力及爐內流場分析 | 劉耀先 | 主持人 | 2011.09 ~ 2012.10 | 新能光電 |
| 2011 | LED 磊晶製程設備內旋轉效應對於熱流場影響之改進研究 | 劉耀先 | 主持人 | 2011.08 ~ 2012.07 | 國科會 |
| 2011 | MOCVD流場可視化分析 | 劉耀先 | 計畫主持人 | 2010.09 ~ 2012.07 | 工研院 |
| 2009 | 複合式冷卻技術對於內冷卻通道中熱傳和壓力降之影響 | 劉耀先 | 計畫主持人 | 2009.10 ~ 2010.09 | 國科會 |
| 年度 | 論文名稱 | 全部作者 | 期刊名稱 | 期數 |
|---|---|---|---|---|
| 2018 | 劉耀先老師在科技部網站之論文清單" href="/zh_tw/per/per1/journal/劉耀先老師在科技部網站之論文清單-44640156" target="_blank">劉耀先老師在科技部網站之論文清單 | |||
| 2018 | Heat Transfer of Impinging Jet Arrays onto Half-smooth, Half-rough Target Surfaces | Lo, Y.H., Liu Y.H. | Applied Thermal Engineering | |
| 2017 | Heat Transfer in Rectangular Channels with Porous Wire Mesh under Impinging Jet Conditions | Sung, H.C, L, Y.H. | International Journal of Thermal Sciences | |
| 2017 | Heat Transfer Measurement in a Rotating Cooling Channel with Staggered and Inline Pin-fin Arrays Using Liquid Crystal and Stroboscopy | Huang, S.C., Wang, C.C., Liu, Y.H. | International Journal of Heat and Mass Transfer | |
| 2017 | Flow Field Investigation in a Rotating Disk Chemical Vapor Deposition Chamber with a Perforated Showerhead | Liu, Y.H., Peng, G.J., Lai, W.C., Huang, C.Y., Liang, J.H. | Experimental Thermal and Fluid Science | |
| 2017 | Nonboiling Heat Transfer and Friction of Air/Water Mist Flow in a Square Duct With Orthogonal Ribs | Huang, Y.H., Chen, C.H., Liu, Y.H. | ASME Journal of Thermal Science and Engineering Applications | |
| 2016 | Natural Convection in an Oscillating Cylindrical Enclosure with Pin-fins | Hsu, H.J., Huang, Y.H., Liu, Y.H. | International Journal of Heat and Mass Transfer | |
| 2016 | Heat Transfer Enhancement of an Impinging Synthetic Air Jet using Diffusion-shaped Orifice | Liu, Y.H., Chang, T.H., Wang, C.C. | Applied Thermal Engineering | |
| 2016 | Heat Transfer and Friction in a Square Channel with Ribs and Grooves | Liu, Y.H., Lo, Y.H., Li, X.X., and Huh, M. | AIAA Journal of Thermophysics and Heat Transfer | |
| 2015 | Effect of Driven Frequency on Flow and Heat Transfer of an Impinging Synthetic Air Jet | Liu, Y.H., Tsai, S.Y., Wang, C.C. | Applied Thermal Engineering | |
| 2013 | Particle Image Velocimetry Measurement of Jet Impingement in a Cylindrical Chamber with a Heated Rotating Disk | Liu, Y.H., Tseng, L.W., Huang, C.Y., Lin, K.L., Chen, C.C. | International Journal of Heat and Mass Transfer | |
| 2013 | High Rotation Number Effect on Heat Transfer in a Leading Edge Cooling Channel with Three Channel Orientations | Huang, S.C. and Liu, Y.H. | ASME Journal of Thermal Science and Engineering Applications | |
| 2013 | Jet Impingement Heat Transfer on Target Surfaces with Longitudinal and Transverse Grooves | Liu, Y.H., Song, S.J, and Lo, Y.H. | International Journal of Heat and Mass Transfer | Issue 1-2 |
| 2012 | Heat Transfer Augmentation in Rotating Triangular Channels with Discrete and V-Shaped Ribs | Liu, Y.H., and Lai, S.Y. | AIAA Journal of Thermophysics and Heat Transfer | Issue 4 |
| 2012 | High Rotation Number Effects on Heat Transfer in a Ribbed Wedge-Shaped Channel with Slot Ejection | Yao-Hsien Liu, Michael Huh, Je-Chin Han | International Journal of Heat and Fluid Flow | Issue 1 |
| 2012 | High Rotation Number Effect on Heat Transfer in a Trailing Edge Channel with Tapered Ribs | Liu, Y.H., Huh, M., and Han, J.C. | International Journal of Heat and Fluid Flow | 1 |
| 2011 | Heat Transfer in Trailing Edge Wedge-Shaped Pin-Fin Channels with Slot Ejection under High Rotation Numbers | Akhilesh P. Rallabandi, Yao-Hsien Liu and Je-Chin Han | ASME Journal of Thermal Science and Engineering Applications | Issue 2 |
| 2011 | High Rotation Number Effects on Heat Transfer in a Rectangular (AR=2:1) Two-Pass Channel | Michael Huh, Jiang Lei, Yao-Hsien Liu and Je-Chin Han | April 2010 ASME Journal of Turbomachinery | Issue 2 |
| 2010 | High Rotation Number Effect on Heat Transfer in a Triangular Channel With 45 deg, Inverted 45 deg, and 90 deg Ribs | Yao-Hsien Liu, Michael Huh, Je-Chin Han and Hee-Koo Moon | ASME Journal of Heat Transfer | Issue 7 |
| 2009 | Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels with Angled Ribs under High Rotation Numbers | Yao-Hsien Liu, Michael Huh, Dong-Ho Rhee, Je-Chin Han and Hee-Koo Moon | ASME Journal of Turbomachinery | Issue 4 |
| 2009 | Rib Spacing Effect on Heat Transfer in Rectangular Channels at High Rotation Numbers | Michael Huh; Yao-Hsein Liu; Je-Chin Han; Sanjay Chopra | AIAA Journal of Thermophysics and Heat Transfer | No. 2 |
| 2009 | Effect of Rib Height on Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) with a Sharp Entrance at High Rotation Numbers | Michael Huh, Yao-Hsein Liu, Je-Chin Han | International Journal of Heat and Mass Transfer | Issue 19-20 |
| 2009 | Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels with Slot Ejection under High Rotation Numbers | Yao-Hsien Liu; Michael Huh; Lesley M. Wright; Je-Chin Han | AIAA Journal of Thermophysics and Heat Transfer | No. 2 |
| 2008 | Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) under High Rotation Numbers | Yao-Hsien Liu, Michael Huh, Je-Chin Han and Sanjay Chopra | ASME Journal of Heat Transfer | Issue 8 |
| 2008 | Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels under High Rotation Numbers | Lesley M. Wright, Yao-Hsien Liu, Je-Chin Han and Sanjay Chopra | ASME Journal of Heat Transfer | Issue 7 |
| 2007 | Rib Spacing Effect on Heat Transfer in Rotating Two-Pass Ribbed Channel (AR=1:2) | Yao-Hsien Liu; Lesley M. Wright; Wen-Lung Fu; Je-Chin Han | AIAA Journal of Thermophysics and Heat Transfer, | No. 3 |
| 年度 | 論文名稱 | 全部作者 | 會議名稱 | 地點 |
|---|---|---|---|---|
| 2017 | Numerical Simulation for Laser Melting Process on the Steel Substrate | Huang, Y.Y., Liu, Y.H., Huang, K.Y. | International Conference on Flow Dynamics | Sendai, Miyagi, Japan |
| 2017 | Liquid Crystal Measurement of Heat Transfer in a Rotating Cooling Channel with Partial Pin-fins | Wang, C.C., Huang, S.C., Liu, Y.H. | International Conference on Flow Dynamics | Sendai, Miyagi, Japan |
| 2017 | Effect of Missing Fin on Endwall Heat Transfer in a Rotating Cooling Channel | Huang, S.C., Wang, C.C., and Liu, Y.H. | ASME Turbo Expo 2017 | Charlotte, NC, USA |
| 2016 | Non-boiling Heat Transfer of Air/Water Mist Flow in a Square Duct with Orthogonal Ribs | Huang, Y.H., Chen, C.H., and Liu, Y.H. | ASME Summer Heat Transfer Conference | Washington DC, USA |
| 2015 | Numerical Simulation for a Phase Change Problem during Laser Melting Process | Liu, Y.H., Huang, W.C., Tsai, T.W., Chuang, C.S., Liu, S.H. | International Conference on Flow Dynamics | Sendai, Miyagi, Japan |
| 2015 | Thermal Management of Data Center Racks Considering Server Arrangement | Sung, H.C., Chang, S.K., Liu, Y.H. | 3rd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control | Taipei, Taiwan |
| 2015 | Impingement Cooling in a Simulated Data Center Servers with an Array of Elliptic Air Jets | Chang, S.K., Lo, Y.H., Liu, Y.H. | ASME 2015 InterPACK | San Francisco, California, USA |
| 2014 | Droplet Size Characterization for Mist Flow in a Single-Side Heated Vertical Square Duct | Liu, Y.H., Lin, C.C., and Chen, C.H. | 2014 4th Joint US-European Fluids Engineering Division Summer Meeting | Chicago, Illinois, USA |
| 2013 | Heat Transfer and Flow Characteristics of Synthetic Jet Impingement Cooling | Liu, Y.H., Tasi, S.Y., and Wang, C.C. | 2nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control | Xi’an, China |
| 2013 | Flow Patterns in a Multiple Impinging Jets CVD Reactor with a Rotating Substrate | Lai, K.F., Liu, Y.H., Huang, C.H., and Wang, C.C. | The 19th American Conference on Crystal Growth and Epitaxy | Keystone, Colorado, USA |
| 2013 | Heat Transfer Measurement in a Rotating Two-pass Rectangular Channel with 45º Angled Ribs and Grooves using Transient Liquid Crystal Technique | Huang, S.C, Yen, C.W., and Liu, Y.H. | Proceedings of 12th Asian Symposium on Visualization | Tainan, Taiwan |
| 2012 | Cooling Technology Research of the Gas Turbine Engine in a Solid Oxide Fuel Cell System for Combined Heat and Power Generation | Wang, C.S., Feng, J.S., and Liu, Y.H. | 2012 Taiwan Symposium on Carbon Capture, Storage and Utilization(2012 CCSU) | Taipei, Taiwan |
| 2012 | Transient Liquid Crystal Measurement of Heat Transfer in a Rotating Rectangular Channel with the Entrance Geometry of Sudden Contraction | Wang, C.S., Lin, Y.S., and Liu, Y.H. | International Conference on Flow Dynamics | Sendai, Miyagi, Japan |
| 2012 | Effect of Angled Grooves on Heat Transfer in an Impingement Channel with Cross-flow | Lo, Y.H., and Liu, Y.H. | International Conference on Flow Dynamics | Sendai, Miyagi, Japan |
| 2012 | High Rotation Number Effect on Heat Transfer in a Leading Edge Cooling Channel with Three Channel Orientations | Huang, S.C. and Liu, Y.H. | ASME Turbo EXPO, GT-2012-68389 | Copenhagen, Denmark |
| 2012 | Investigation of Substrate Rotation on the Flow Field in a Chemical Vapor Deposition Chamber Using Particle Image Velocimetry | Tseng, L.W., Wang, C.S., Liu, Y.H., Wang, C.C., Huang, C.Y., Chen, C.C., Lin, K.L. | 24th International Cryogenic Engineering Conference | Fukuoka, Japan |
| 2011 | High Rotation Number Effect on Heat Transfer in a Triangular Channel with Discrete V-shaped Ribs | Wang, C.S, Lin, Y.S., and Liu, Y.H. | International Conference on Flow Dynamics | Sendai, Miyagi, Japan |
| 2011 | Heat Transfer Characteristics of Jet Impingement on a Target Surface with Grooves | Lo, Y.H., Song, S.J., and Liu, Y.H. | International Conference on Flow Dynamics | Sendai, Miyagi, Japan |
| 2010 | High Rotation Number Effects on Heat Transfer in a Pin-Fin Roughened Wedge-Shaped Trailing Edge Channel with Slot Ejection | Rallabandi, A.P., Liu, Y. H., and Han, J. C., | ASME Turbo EXPO, GT-2010-22832 | Glasgow, United Kingdom |
| 2009 | High Rotation Number Effects on Heat Transfer in a Rectangular (AR=2:1) Two Pass Channel | Huh, M., Lei, J., Liu, Y. H., and Han, J. C | ASME Turbo EXPO, GT-2009-59421 | Orlando, Florida, USA |
| 2009 | Heat Transfer and Pressure Drop in a Triangular Channel with 45°, Inverted 45°, and 90° rib under High Rotation Numbers | Liu, Y.H., Huh, M., Han, J.C., and Moon, H.K | ASME Turbo EXPO, GT-2009-59216 | Orlando, Florida, USA |
| 2008 | Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels with Angled Ribs under High Rotation Numbers | Liu, Y.H., Huh, M., Rhee, D.H., Han, J.C., and Moon, H.K | ASME Turbo EXPO, GT-2008-50344, | Berlin, Germany |
| 2008 | Effect of Rib Spacing on Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) with a Sharp Entrance at High Rotation Numbers | Huh, M., Liu, Y.H., Han, J.C., and Chopra, S. | ASME Turbo EXPO, GT-2008-50311 | Berlin, Germany |
| 2008 | Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels with Slot Ejection under High Rotation Numbers | Liu, Y.H., Huh, M., Wright, L.M., and Han, J.C., | ASME Turbo EXPO, GT-2008-50343 | Berlin, Germany |
| 2007 | Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) under High Rotation Number | Liu, Y.H., Huh, M., Han, J.C., and Chopra, S | ASME Turbo EXPO, GT-2007-27067 | Montreal, Canada |
| 2007 | Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels under High Rotation Numbers | Wright, L.M., Liu, Y.H., Han, J.C., and Chopra, S., | ASME Turbo EXPO, GT-2007-27093 | Montreal, Canada |
| 2006 | Rib Spacing Effect on Heat Transfer and Pressure Loss in a Rotating Two-Pass Rectangular Channel (AR=1:2) with 45-Degree Angled Ribs | Liu, Y.H., Wright L.M., Fu, W.L., and Han, J.C | ASME Turbo EXPO, GT-2006-90368 | Barcelona, Spain |