金大仁(2020年退休)
姓名 金大仁(2020年退休)
電子郵件 tykam(at)nycu.edu.tw
職 稱 教授
辦公室 工程五館420室
實驗室 工程五館248室(分機:55159),複合材料結構實驗室
組別 固力與控制組
授課領域 機械元件及系統之失效分析及可靠度評估 複合材料構件之最佳設計與製造方法、構件強度及壽命試驗
研究專長 可靠度工程、複合材料力學、破裂力學、實驗力學、最佳設計
國家 學校名稱 系所 學位 期間
美國 西北大學 結構力學 博士 1979.09 ~ 1981.12
美國 華盛頓大學 結構力學 碩士 1978.01 ~ 1979.02
中華民國 國立成功大學 土木工程 學士 1973.09 ~ 1977.07
服務機關名稱 單位 職務 期間
國立交通大學 工學院 教授兼院長 1994.11 ~ 2000.07
南非Univ. of Preoria 機械工程系 客座教授 1990.02 ~ 1990.07
國立交通大學 機械工程系 教授 1986.08 ~ 迄今
中科院統一所及品保中心 結構設計及二保組 顧問 1984.07 ~ 1988.06
國立交通大學 機械工程系 副教授 1982.08 ~ 1986.08
華盛頓大學 土木工程系 研究員 1981.09 ~ 1982.07
美國Stone and Webster Corp 工程力學(核電部) 工程師 1979.03 ~ 1979.09
年度 計畫名稱 參與人 職稱/擔任之工作 計畫期間 補助/委託或合作機構
2010 複合材料三明治風力葉片之材料常數識別與健診研究 金大仁 計畫主持人 2010.08 ~ 2011.07 國科會
2010 垂直軸式層狀型風力發電系統之研製-子計畫四:垂直式層狀堆疊型風力機之複材結構及機械元件的測試平台、允收標準及壽命試驗的建立(I) 金大仁 計畫主持人 2010.01 ~ 2010.12 國科會
2010 垂直軸式層狀型風力發電系統之研製-總計畫(I) 金大仁 計畫主持人 2010.01 ~ 2010.12 國科會
2009 奈米材料披覆層之特性識別研究 金大仁 計畫主持人 2009.08 ~ 2010.07 國科會
2009 科普活動:能源科技的發展與應用 金大仁 計畫主持人 2009.05 ~ 2009.10 國科會
2009 複合材料風力機之研製-子計畫三:風力機試驗平台與可靠度試驗程序之建立(II) 金大仁 計畫主持人 2009.01 ~ 2009.12 國科會
2009 複合材料風力機之研製-總計畫(II) 金大仁 計畫主持人 2009.01 ~ 2009.12 國科會
2008 再生能源科技的發展與應用(尖端的科學) 金大仁 計畫主持人 2008.11 ~ 2009.04 國科會
2008 加勁複合材料板的揚聲特性研究 金大仁 計畫主持人 2008.08 ~ 2009.07 國科會
2008 複合材料風力機之研製-總計畫 金大仁 計畫主持人 2008.01 ~ 2008.12 國科會
2008 複合材料風力機之研製-子計畫三:風力機試驗平台與可靠度試驗程序之建立 金大仁 計畫主持人 2007.01 ~ 2008.12 國科會
年度 論文名稱 全部作者 期刊名稱 期數
2015 金大仁老師在科技部網站之論文清單" href="/zh_tw/per/per1/journal/金大仁老師在科技部網站之論文清單-25695973" target="_blank">金大仁老師在科技部網站之論文清單
2008 "Modal characteristics of composite plates elastically restrained at different locations" W. F. Hou and T. Y. Kam Int’l Journal of Mechanical Science(Accepted)
2007 Free vibration analysis and material constants identification of laminated composite sandwich plates C. R. Lee, T. Y. Kam, and Sun, S. J. ASCE, Journal of Engineering Mechanics No. 8
2007 System parameters evaluation of flexibly supported laminated composite sandwich plates C. R. Lee, S. J. Sun and T. Y. Kam AIAA No. 9
2007 Elastic Constants Identification of Symmetric Angle-Ply Laminate via a Two-Level Optimization Approach C. M. Chen and T. Y. Kam J. Composites Science & Technology No.3-4
2007 A two-level optimization procedure for material characterization of composites using two symmetric angle-ply beams C. M. Chen and T. Y. Kam International Journal of Mechanical Sciences(accepted)
2006 “System identification of partially restrained composite plates using measured natural frequency” C. R. Lee and T. Y. Kam ASCE, J. Engineering Mechanics No.8
2006 Identification of mechanical properties of elastically restrained laminated composite plates using vibration data C. R. Lee and T. Y. Kam J. Sound and Vibration No.3-5
2006 Elastic Constants Identification of Composite Materials Using a Single Angle-Ply Laminate C. M. Chen and T. Y. Kam ASCE, J. Engineering Mechanics No.11
2001 “Elastic constants identification of shear deformable laminated composite plates” W. T. Wang and T. Y. Kam ASCE, Journal of Engineering Mechanics Division No. 11
2000 “Probabilistic failure analysis of transversed laminated composite plates using the first –order second moment method” S. C. Lin and T. Y. Kam ASCE, J. Engineering Mechanics No. 8
2000 “Determination of elastic constants of composite laminates via static testing” W. T. Wang and T. Y. Kam Int’l J. Composite Structures(Invited paper) No. 4
2000 “Identification of material constants of composite laminated pressure vessels using measured strains,” T. Y. Kam, C. H. Lin and W. T. Wang ASME, Journal Engineering Materials and Technology No. 4
1999 “Experimental and theoretical predictions of first-ply failure strength of laminated composite plates” T. Y. Kam and F. M. Lai International Journal of Solids and Structures No. 16
1999 “Failure analysis of a fragile laminated composite canister cover" J. H. Wu, W. T. Wang and T. Y. Kam Proc., Instn. Mech. Engrs. Part G (Aerospace Engineering)
1999 “Reliability assessment of laminated composite plates with random strength parameters ” T. Y. Kam, K. H. Chu and E. S. Chang AIAA No. 12
1999 "External failure pressure of a frangible laminated composite canister cover” T. Y. Kam, J. H. Wu and W. T. Wang Int’1 J. Composite Structure
1999 “Optimum Design of Foam-Filled Laminated Composite Sandwich Plates” T. Y. Kam, F. M. Lai, and T. M. Chao Int’1 J. Solids & Structures No.19
1998 “Fatigue reliability evaluation for composite laminates via a direct numerical integration technique” T. Y. Kam, K. H. Chu and S. Y. Tsai Int'l J. Solids & Structures No. 13
1998 “Fatigue analysis of cracked plates repaired with bonded composite patches” T. Y. Kam, Y. C. Tsai and K. H. Chu AIAA No. 1
1998 “Stiffness identification of laminated composite shafts” T. Y. Kam and C. K. Liu International J. of Mechanical Sciences No. 9
1998 “Fatigue of cracked plates repaired with single-sided composite patches” T. Y. Kam, K. H. Chu and Y. C. Tsai AIAA No. 4
1997 “Fatigue Reliability Analysis of Composite Laminates under Spectrum Stress,” T. Y. Kam, S. Y. Tsai and K. H. Chu Int’1 J. Solids & Structures No. 12
1997 "First-ply Failure Strength of Laminated Composite Pressure Vessels," T. Y. Kam and Y. W. Lui Int'l J. Composite Structures, Nos. 1-4
1997 “Reliability Formulation for Composite Laminates Subjected to First-ply Failure,” T. Y. Kam and E. S. Chang Int'l J. Composite Structures Nos. 1-4
1997 “Evaluation of buckling and first-ply failure probabilities of composite laminates,” S. C. Lin, T. Y. Kam and K. H. Chu Int'l J. Solids & Structures No. 13
1996 “Prediction of First-ply Failure Strengths of Laminated Composite Plates Using a Finite Element Approach,” T. Y. Kam, R. R. Chang, H. F. Sher and T. N. Chao, International Journal of Solids & Structures
1996 "Minimum Weight Design of Laminated Composite Plates Subject to Strength Constraint," T. Y. Kam, F. M. Lai and S. C. Liao, AIAA J.
1995 “Maximum Stiffness Design of Laminated Composite Plates via a Constrained Global Optimization Approach,” T. Y. Kam and F. M. Lai Int'l J. of Composite Structures,
1995 “Optimal Parameters for Curing Gr/Ep Composite Laminates,” T. Y. Kam, F. M. Lai and H. F. Sher Int'l J. of Materials Processing Technology,
1995 “First-ply Failure Analysis of Laminated Composite Plates Based on the Layerwise Linear Displacement Theory,” T. Y. Kam and T. P. Jan, Int'l J. of Composite Structures,
1995 “Design of Laminated Composite Plates for Optimal Dynamic Characteristics Using a Constrained Global Optimization Technique,” T. Y. Kam and F. M. Lai, Int'l J. Computer Methods in Applied Mechanics & Engineering
1995 “Nonlinear and First-ply Failure Analysis of Laminated Cross-ply Plates,” T. Y. Kam and H. F. Sher, Journal of Composite Materials,
1995 “Impact analysis of shear deformable laminated composite plates,” T. Y. Kam and W. J. Chang, J. Energy Resources and technology, ASME,
1994 “Analysis of Geometrically Nonlinear Clamped Laminated Composite Plates,” T. Y. Kam and H. F. Sher Chinese J. of Mechanics, 2
1994 “Design of Thick Laminated Composite Plates for Maximum Damping,” T. Y. Kam, R. R. Chang Int'l J. Composite Structures,
1994 “Crack Size Identification Using an Expanded Mode Method,” T. Y. Kam and T. Y. Lee International Journal of Solids & Structures,
1994 “Identification of Crack Size via an Energy Approach,” T. Y. Kam and T. Y. Lee Int. J. Nondestructive Evaluation,
1993 “Detection of Crack Location via a Global Minimization Approach,” T. Y. Lee and T. Y. Kam Int'l J. Engineering Optimization,
1993 “Reliability Analysis of Nonlinear Laminated Composite Plate Structures,” T. Y. Kam, S. C. Lin and K. M. Hsiao Int'l J. Composite Structures,
1993 “Finite Element Analysis of Shear Deformable Laminated Composite Plates,” T. Y. Kam and R. R. Chang J. Energy Resources & Technology, ASME,
1993 “Design of Laminated Composite Plates for Maximum Buckling Load and Frequency,” T. Y. Kam and R. R. Chang Int'l J. Computer Methods in Applied Mechanics & Engineering,
1993 “Design of Laminated Composite Plates for Maximum Shear Buckling Load,” R. R. Chang, K. H. Chu and T. Y. Kam ASME, J. Energy Resources Technology,
1992 “Optimum Design of Laminated Composite Structures Via a Multilevel Substructuring and Optimization Approach,” T. Y. Kam Int'l J. of Eng. Optimization,
1992 “Probabilistic Analysis of Imperfect Frames Using the Stochastic Finite Element Method,” S. C. Lin and T. Y. Kam Computers and Structures,
1992 “Reliability Analysis of Laminated Composite Plates,” T. Y. Kam and S. C. Lin Proc. NSC, Part A,
1992 “Design of Thick Laminated Composite Plates for Maximum Stiffness,” T. Y. Kam and R. R. Chang Int'l J. of Engineering Optimization,
1992 “Design of Laminated Composite Box-Structures Using a Multilevel Optimization and Substructuring Approach,” T. Y. Kam Int'l J. of Modelling, Measurement & Control,
1992 “Buckling Analysis of Shear Deformable Laminated Composite Plates,” T. Y. Kam and R. R. Chang Int'l J. Composite Structures,
1992 “Detection of Cracks from Modal Test Data,” T. Y. Kam and T. Y. Lee Int'l J. Engineering Fracture Mechanics,
1992 “Buckling Failure Probability of Imperfect Frames,” S. C. Lin and T. Y. Kam Computers and Structures,
1991 “Optimal Design of Laminated Composite Plates Using a Global Optimization Technique, “ T. Y. Kam and J. Snyman Composite Structures,
1990 “A Probabilistic Procedure for the Nonlinear Analysis of Structures,” T. Y. Kam and S. C. Lin Computers and Structures
1989 “Reliability Analysis of Brittle Structures under Thermal Shocks,” T. Y. Kam Engineering Facture Mechanics, 3
1989 “Nonlinear Analysis of Tubular Steel Framed Structures, “ T. Y. Kam Computers and Structures,
1989 “Multilevel Optimal Design of Laminated Composite Plate Structures, “ T. Y. Kam and M. D. Lai Computers and Structures, 2
1989 “Optimal Design of Laminated Composite Plates with Dynamic and Static Considerations, “ T. Y. Kam and R. R. Chang Computers and Structures, 2
1989 “Thermal Shock Fracture Analysis of Brittle Bodies,” T. Y. Kam and C. D. Lu Engineering Fracture Mechanics,
1989 “Reliability Analysis of Brittle Systems Considering Several Random Variables, “ T. Y. Kam and C. D. Lu Engineering Fracture Mechanics,
1988 “Large Deflection Analysis of inelastic Plane Frames,” T. Y. Kam ASCE, J. of Structural Division, 1
1988 “Nonlinear Dynamic Analysis of Inelastic Steel Plane Frames,” T. Y. Kam, S. C. Lin Computers and Structures, 4
1988 “Probabilistic Dynamic Analysis of Existing Structure,“ T. Y. Kam Int. J. Math. & Compt. Modelling,
1987 “Reliability of Framed Structures with Initial Imperfections,” T. Y. Kam Computers and Structures, 5
1987 “Reliability of Brittle Structures under Random Loadings,” T. Y. Kam, H. C. Chew Computers and Structures, 5
1986 “Nonlinear Analysis of Steel Plane Frames with Initial Imperfections, “ T. Y. Kam, F. S. Lee Computers and Structures, 4
1984 “Subjective Modification of Aging Stochastic System,” T. Y. Kam, C. B. Brown ASCE, J. of Engineering Mech. Division, 5
1983 “Inelastic Tangential Stiffness for 2-D Frames,” T. Y. Kam, E. C. Rossow, R. B. Coroties ASCE, J. of Structural Division, 11
1983 “Reliability of Nonlinear Framed Structures,” T. Y. Kam, R. B. Coroties, E. C. Rossow ASCE, J. of Structural Division, 7
1983 “Updating Parameters with Fuzzy Entropies,” T. Y. Kam, C. B. Brown ASCE, J. of Engineering Mech. Division 6
年度 論文名稱 全部作者 會議名稱 地點
2012 複合材料修補件之疲勞行為研究 吳家宏,金大仁 中華民國第五屆破壞科學研討會論文集,pp.97-104.
2008 Elastically Restrained Composite Plates-Analysis and Applications T. Y. Kam Keynote lecture, ICCE-16, Kunming, China.
2006 應用不同破壞準則探討IC 卡讀取頭之疲勞壽命可靠度 張耀文, 金大仁 第二十三屆全國學術研討會
2006 Elastic Constant Identification of Laminated Composite Sandwich Plate T. Y. Kam Int’l Syposium on Experimental Mechanics Sapporo, Japan.
2006 具彈性支撐圓板之聲傳分析 陳昌毅, 金大仁 第十四屆中華民國振動與噪音工程學術研討會論文集
2006 音圈彈波在條狀平板揚聲器之應用研究 許加融, 金大仁 第二十三屆全國學術研討會論文集
2006 複合材料三明治翼型結構之設計與製作 楊欣翰, 金大仁 2006 航太學會/民航學會聯合學術研討會論文集
2005 應用不同破壞準則探討彈簧疲勞壽命之可靠度 張耀文, 金大仁 第二十九屆全國力學會議
2005 Material Characterization of Shear deformableLaminated Plates C. R. Lee and T. Y. Kam Int. Conference on Nondestructive Evaluation Maine, U.S.A
2004 複合材料板受邊緣激震之聲傳研究 蘇鎮隆, 金大仁 中國機械工程學會第二十一屆 全國學術研討會論文集
2004 彈性支撐複合材料平板之非破壞彈性常數識別 李清榮, 金大仁 2004 航空機械工程學 術研討會論文集
2004 具彈性支撐較厚複合材料平板之材料常數識別 李清榮, 金大仁 第二十一屆全國學術研討會論文集
2004 Material Characterization of Composite Laminates Using a Two-level Optimization Approach C. M. Chen and T. Y. Kam ICCE12 Hilton-Head, S. C.(CD)
2003 “Accelerated Life Testing and Life Assessment of Active Opto-electronic Protective Devices” T. K. Chung and T. Y. Kam, S. B. Hsieh The 2003 Annual Conference of Chinese Institute of Industrial Engineers Taiwan
2002 複合材料積層板結構之彈性常數識別 陳志明, 金大仁 第26 屆全國力學會議論文集
2002 “Natural Frequencies of Laminated Composite Rectangular Plates with Different Boundary Conditions” 郝偉芬, 金大仁 第26 屆全國力學會議論文集
2002 ”Reliability Assessment of Safety Light Curtain” T. K. Chung, H. C. Liao and T. Y. Kam The 2002 Annual Conference of Chinese Institute of Industrial Engineers Taiwan
2001 “The Development of a Laminated Composite Sandwich Panel-form Loudspeaker” T. Y. Kam ICCE8 Spaim
2000 ” Determination of elastic constants of composite laminates using measured natural frequencies,” W. T. Wang and T. Y. Kam CADCOMP 2000, 60-65 (Invited). Bologna, Italy,
2000 “Mismatch analysis of TAB-on-glass connection with ACF,” W. F. Hou, T. Y. Kam, A. Hsieh, J. C. Chen and S. M. Chang SPIE, The International Society for Optical Engineering, Vol. 4079, 221-227
1999 “纏繞式複合材料圓柱殼之衝擊行為研究,” 佘海豐, 金大仁, 賴俊忠 第 23 屆全國力學會議論文集(二), 179-185, 新竹市
1999 “Design of a frangible laminated composite launch tube closure,“ W. T. Wang, J. H. Wu and T. Y. Kam ASME Int’1 Conference on Mechanical Engineering, Advances in Aerospace Materials and Structures, 129-138.
1998 “Finite element analysis of foam-filled laminated composite sandwich plates, “ T.Y. Kam and F.M. Lai. Computer Methods in Composite Materials VI, Cadcomp 98, Computational Mechanics Publication, pp. 453-462. UK
1998 對隨機性複合材料結構初層破壞的敏感度分析 林世章,金大仁 中華民國第五屆破壞科學研討會論文集,pp.143-155.
1998 複合材料積層板之強度分布及可靠度分析 朱高弘,金大仁 中華民國第五屆破壞科學研討會論文集,pp. 87-95
1997 “Analysis of Bonded Composite Repairs to Cracked Compact Specimens, “ Y.C. Tsai and T.Y. Kam ASME Symposium on Composite Materials, Design & Analysis, Energy Week, Vol III, pp.60-64.
1997 以機械效率評估滾珠螺桿之可靠度探討 張起明,盧淳登,張樂台,金大仁 第二屆中華民國可靠度與維護度研討會論文集.
1997 “Fatigue behavior of cracked plated plates repaired with composite patches”, T.Y. Kam, K.H. Chu and Y.C. Tsai, Proceedings, 4th International Conference on Composite Engineering, pp. 674-5.
1997 複合材料壓力容器之破壞強度實驗 李富村,金大仁 第十四屆全國機械工程研討會論文集,固力與設計,pp.339-346.
1996 “Nonlinear Impact Analysis of Laminated Composite Plates” T.Y. Kam ASME, Materials and Design Technology, PD-Vol.82, pp.236-244.
1996 “Mode I Energy Release Rate of Thin Composite Laminates” H.F. Sher and T.Y. Kam Proc. 4th Symposium Fracture Science, pp.30-40.
1996 “Experimental Investigation of Cumulative Damage And Fatigue Life Distribution of Composite Laminates, Proceeding” T.Y. Kam and K.H. Chu, lst Int`l Conf. Composite Science & Technology. pp.221-228.
1996 “Reliability Analysis of Composite Laminates Subject to Buckling and First-ply Failure”, S.C. Lin and T.Y. Kam Proc. 5th Int`l Conf. Comput. Aided Design in Composite Material Technology, pp329-338.
1996 滾珠螺桿機械效率之可靠度評估模式 謝介銘,金大仁,盧淳登,張起明 中華民國力學學會第廿屆全國力學會議論文集(三),pp.466-472.
1996 滾珠螺桿機械效率之評估 張起明,許登原,謝介銘,金大仁 中國機械程師協會第十三屆學術研討會論文集貨(設計).pp.163-170
1995 “Stress Analysis of Damaged Aluminum Specimens Repaired by Composite Laminates” K.S. Tsai and T.Y. Kam Proceedings, 7th Annual Msc Taiwan Users` Conf., 2, pp.1-15.
1995 “Fatigue Reliability of Materials under Cyclic Stress of Varying Amplitudes” K.H. Chu, S.Y. Tsai and T.Y. Kam Proc. of the lst R.O.C. Symp. on R&M, pp.87-93.
1995 “Buckling of Laminated Composite Plates Subject to Nonuniform in-plane Edge Loads” T.Y. Kam and K.H. Chu Materials and Design Technology, ASME, PD-Vol.71,pp.207-215.
1995 “Reliability Analysis of Degraded Structures using a Statistical System Identification Technique” T.Y. Kam and T.Y. Lee Applications of Statistics and Probability, 7th Int’l conf. Reliability and Risk Analysis, Favre & Mebarki(eds),Vol.2.pp.963-969
1994 “Determination of Natural Frequencies of Laminated Composite Space Structures via the Experimental and Finite Element Approaches” T. Y. Kam, C. M. Yang and J. H. Wu The 8th MSC Nastran Taiwan User’s Conference, pp. 35-43. Taiwan
1994 “Nondestructive Evaluation of Foundation Rigidity via the Model Testing Approach” T. Y. Kam and C. K. Liu Proceeding of the 1994 Far East Conference on NDT, pp. 355-362.
1994 “Verification of Finite Element Models of Laminated Composite Truss Structures Using Test Data” T. Y. Kam Proceedings, 10th International Conference on Experimental Mechanics, Portugal, Vol.1, pp. 69-74.
1993 “Fatigue Analysis of Laminate Composite Structure Consiering Matrix Cracking”, T. Y. Kam and R. R. Chang, Proceedings of Int’l Conf. Comput. Meth. in Engineering, Singapore, 2, pp. 974-979. Singapore
1993 “A Procedure for Nondestructive Crack Detection” T. Y. Kam and T. Y. Lee The 8th International Congress of Fracture Mechanics, kiev.
1993 “Optimal Stacking Sequences of Composite Laminates for Maximum Buckling Strength” T. Y. Kam 9th International Conference on Composite Materials, Spain, 4, pp. 70-75. Spain
1992 “Detection of Cracks from Modal Test Data Using a System Identiication Approach” T. Y. Kam Proc. IEEE Intelligent Cont. & Instru., Singapore, (2), pp. 934-939. Singapore
1992 “Application of Fracture Mechanics in Assessing Structural Integrity” T. Y. Kam, Proc. 2nd Symposium Fracture Science, pp. 17-22, invited lecture.