| 2013 |
Investigating the effect of fabrication parameters on the mechanical behavior of polyacrylonitrile fiber |
Tai-Yuan Wang, Hsiao-Chun Chang, Yu-Tsung Chiu and Jia-Lin Tsai |
ROC thirty-seventh session of the National Mechanics Conference |
November 8-9, Taiwan. |
| 2013 |
Investigating fracture behaviors of debonded composite sandwich structure |
Chien-Yang Huang, Yen-Kun Lai, Yi-Hsin Nieh and Jia-Lin Tsai |
Republic of China Aerospace Society 55th Annual Meeting and Symposium |
New Taipei freshwater November 30, Taiwan |
| 2013 |
Investigate Mechanical Behavior of Gold Nanowire with Defect |
Jia-Lin Tsai and Cheng-Fong Hong |
the 2nd International Symposium on Quantum, Nano and Micro Technologies (ISQNM 2013) |
December 1-2, Singapore |
| 2013 |
Micromechanical Stick-slip Model for Characterizing Damping Responses of Fiber Composites |
Tai-Yuan Wang, Shou-Chi Liu and Jia-Lin Tsai |
the 7th Asian-Pacific Conference on Aerospace Technology and Science |
|
| 2013 |
Investigating Mechanical Performances of Double Lap Composite Joint with Stepwise Patch |
Jia-Lin Tsai and Wen-Yen Chuang |
the Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13) |
September 11-13, Sapporo, Japan. |
| 2013 |
Characterizing the mechanical responses of carbon/epoxy composite badminton racket based on equivalent material properties |
Chia-Min Li, Ting-Chu Lu, Tsung-Han Liu, Tzu-Wei Wang, and Jia-Lin Tsai |
Chinese Mechanical Engineering Society Thirtieth National Symposium |
Ilan, December 6-7, Taiwan |
| 2012 |
Investigating particle aggregation effect on tensile strength of composites |
Cheng-Wen Hsu and Jia-Lin Tsai |
15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS (ECCM-15) |
June 24-28, Venice, Italy |
| 2012 |
Investigating Mechanical Properties of Graphene Nanocomposites |
Jia-Lin Tsai and Sung-Chiun Shiu |
American Society for Composites 27th Technical Conference |
October 1-3, Sheraton Arlington Hotel, Arlington, Texas, USA |
| 2012 |
Multi-walled carbon nanotubes to explore for polyacrylonitrile precursor fiber reinforced the role of |
Tai-Yuan Wang, Yu-Tsung Chiu, Jong-Pyng Chen, Hsiao-Chun Chang, Sung-Chiua Shiu, and Jia-Lin Tsai |
ROC thirty-sixth meeting of the National Mechanics |
November 16-17, Taiwan |
| 2012 |
Investigating Vibration Damping Response of Nanocomposites and Fiber Composites |
C.Y. Huang and Jia-Lin Tsai |
8th Asian-Australasian Conference on Composite Materials (ACCM-8) |
November 6-8, Kuala Lumpur, Malaysia |
| 2011 |
Characterizing Load Transfer Efficiency in Carbon Nanotubes Nanocomposites using multiscale simulation |
Ting-Chu Lu and Jia-Lin Tsai |
The 18th International Conference on Composite Materials (ICCM-18) |
21-26 August, Jeju Island, Korea |
| 2011 |
Enhancing Fracture Toughness of Glass/Epoxy Composites for Wind Blades Using Silica Nanoparticles and Rubber Particles |
Jia-Lin Tsai, Bao-Hung Huang and Yi-Lieh Cheng |
The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-12) |
24-26 January, Hong Kong, China. |
| 2011 |
Investigating failure behaviors of adhesive joint |
Tai-Yuan Wang and Jia-Lin Tsai |
Republic of China Aerospace Institute Symposium |
Oct. 5, Taichung, Taiwan. |
| 2011 |
Effect of interfacial roughness and adhesive thickness on adhesive joint strength and failure mechanism |
Jing-Suei Gao and Jia-Lin Tsai |
Thirty-fifth session of the National Institute of Mechanics Conference ROC mechanics |
November 18-19, Tainan, Taiwan. |
| 2010 |
Investigating the Stress Distribution of Single Walled Carbon Nanotubes Embedded in Polyimide Nanocomposites |
Shi-Hua Tzeng and Jia-Lin Tsai |
The 2nd International Conference on Nanomechanics and Nanocomposites |
Oct. 10-13, Beijing, China |
| 2010 |
Investigating Failure Behaviors of Adhesive Joint based on Molecular Dynamics Simulation |
Tai-Yuan Wang and Jia-Lin Tsai |
The 2nd International Conference on Nanomechanics and Nanocomposites |
Oct. 10-13, Beijing, China |
| 2010 |
Investigating Local Mechanical Properties of Graphite/Polyimide Nanocomposites |
Jing-Suei Gao and Jia-Lin Tsai |
The 7th Asian-Australasian Conference on Composite Materials (ACCM-7) |
15th -18th November, Taipei, Taiwan. |
| 2010 |
Investigating Particle Effect on Tensile Strength of Particulate Nanocomposites |
Jia-Lin Tsai and Yi-An Lin |
he 9th international conference on fracture and damage mechanics |
|
| 2010 |
Hardy Formulation in Simulation of Graphene Sheet |
Meng-Jhe Sie and Jia-Lin Tsai |
The 12th International Conference on Mesomechanics |
Taipei, Taiwan |
| 2010 |
Effect of vdW interaction on the mechanical properties of graphene sheet and single walled carbon nanotubes |
Jia-Lin Tsai and Shi-Hua Tzeng |
The 12th International Conference on Mesomechanics |
Taipei, Taiwan |
| 2010 |
Investigating Damping Responses of Particulate Nanocomposites and Nanocomposite Sandwich Structures |
Jia-Lin Tsai and Nai-Ren Chang |
he 14th European Conference on Composite Materials |
Budapest, Hungary |
| 2009 |
"Investigating Particle Effect on the Tensile Strength of Nanocomposites – Using Linear Elastic Fracture Mechanics" |
Yi-An Lin and Jia-Lin Tsai |
Thirty-third National Conference on Theoretical and Applied Mechanics of the Society of Theoretical and Applied Mechanics of the Republic of China |
Miaoli, Taiwan |
| 2009 |
"Characterizing fracture parameters of graphene sheet using atomistic simulation and continuum modeling" |
Jia-Lin Tsai and Yu-Jen Tzou |
The 1st joint American- Canadian International Conference on Composites |
Newark, Delaware, USA |
| 2009 |
"Characterizing mechanical properties of graphite using molecular dynamics simulation" |
Jia-Lin Tsai and Jie-Feng Tu |
The 17 International Conference on Composite Materials |
Edinburgh, UK |
| 2008 |
"Effect of zirconia on the dynamic mechanical responses of alumina ceramics" |
Wen-Yen Chuang, Yi-Lieh Cheng, Cheng-Kun Chu and Jia-Lin Tsai |
Thirty-second session of the National Conference on Theoretical and Applied Mechanics of the Society of Theoretical and Applied Mechanics of the Republic of China |
Chiayi, Taiwan |
| 2008 |
"Toughening fracture toughness of glass fiber/epoxy composites using silica nanoparticles together with liquid rubber" |
Jia-Lin Tsai, Bao-Hung Huang and Yi-Lieh Cheng |
he 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics |
Tainan, Taiwan |
| 2008 |
"Characterizing mechanical properties of graphite nanoplatelets using molecular mechanics and molecular dynamics simulation" |
Jie-Feng Tu and Jia-Lin Tsai |
Thirty-second session of the National Conference on Theoretical and Applied Mechanics of the Society of Theoretical and Applied Mechanics of the Republic of China |
Chiayi, Taiwan |
| 2008 |
"Characterizing the elastic properties of polyimide/carbon nanotube composites" |
Shi-Hua Tzeng, Jia-Lin Tsai and Yu-Tsung Chiu |
The 6th Asia-Australasian Conference on Composite Materials |
Kumamoto, Kyushu, Japan |
| 2008 |
"Investigating the load transfer efficiency in the carbon nanotube reinforced nanocomposites" |
Ting-Chu Lu and Jia-Lin Tsai |
The 6th Asia-Australasian Conference on Composite Materials |
Kumamoto, Kyushu, Japan |
| 2008 |
"Modeling flexural damping behavior of composite laminate beam" |
Nai-Ren Chang and Jia-Lin Tsai |
The 6th Asia-Australasian Conference on Composite Materials |
Kumamoto, Kyushu, Japan |
| 2008 |
"Investigating nanoparticle effect on the Mode I fracture toughness of glass/epoxy composites" |
Jia-Lin Tsai and Yi-Lieh Cheng |
International Conference on Multifunctional Materials and Structures |
Hong Kong, China |
| 2008 |
"Investigating silica nanoparticles effect on dynamic and quasi-static compressive strengths of glass fiber/epoxy nanocomposites" |
Jia-Lin Tsai and Yi-Lieh Cheng |
The Sixteenth Annual International Conference on Composites/Nano Engineering |
Kunming China |
| 2008 |
"Silica nanoparticle effect on compressive failure of glass/epoxy composites" |
Yi-Lieh Cheng, and Jia-Lin Tsai |
Republic of the ninth to undermine the scientific symposium |
Kenting, Taiwan |
| 2007 |
"Characterizing Tensile Strength of Notched Cross-Ply and Quasi-Isotropic Composite Laminates" |
Chung-Wen Chen and Jia-Lin Tsai |
Twenty-fourth National Conference of the Chinese Mechanical Engineering Society |
Chungli, Taiwan |
| 2007 |
"Characterizing Moisture Effect on the Nonlinear Behaviors of Epoxy Resin" |
Yang-Kai Chi, Jhong-Yu Han and Jia-Lin Tsai |
Twenty-fourth National Conference of the Chinese Mechanical Engineering Society |
Chungli, Taiwan |
| 2007 |
Characterizing the Mechanical Properties of Particulate Nanocomposites using Multi-Scale Simulation |
ia-Lin Tsai and Shi-Hua Tzeng |
the Taiwan-Russia Joint Symposium on Soft Materials |
Taiwan |
| 2007 |
"Investigating Mechanical Behaviors of Particulate Nanocomposites" |
Jia-Lin Tsai and Hung Hsiao |
The American Society for Composites, 22th Technical Conference |
Seattle, WA |
| 2007 |
"Characterizing Mechanical Properties of Particulate Nanocomposites Using Multi-Scale Simulation" |
Jia-Lin Tsai and Shi-Hua Tzeng |
The 16 International Conference on Composite Materials |
Kyoto, Japan |
| 2007 |
"Thermal Residual Stress Effect on Mechanical Behaviors of Fiber Composites with Different Fiber Arrays" |
Jia-Lin Tsai and Yang-Kai Chi |
he 7th International Conference of Thermal Stresses, |
Taipei, Taiwan |
| 2007 |
"Multi-displacement Continuum Model for Discrete Systems" |
Jia-Lin Tsai and C.T. Sun |
ASME Applied Mechanics and Materials Conference |
University of Texas at Austin, U.S.A. |
| 2006 |
"Organoclay Effect on Transverse Tensile Strength of Glass/Epoxy and Graphite/Epoxy Composites" |
Jia-Lin Tsai, Ming-Dao Wu and Tsung-Jung Huang |
Chinese Journal of Mechanics The 30th National Conference on Theoretical and Applied Mechanics |
Changhua Da-Yeh University, Taiwan |
| 2006 |
"Organoclay Effect on Transverse Tensile Strength and In-Plane Shear Strength of Unidirectional Glass/Epoxy Nanocomposites" |
Jia-Lin Tsai and Ming-Dao Wu |
The Fifth Asian-Australasian Conference on Composite Materials |
Hong Kong |
| 2006 |
"Effect of Organoclay on Mechanical Properties of Glass/Epoxy Nanocomposites: Tensile, Flexure and Interlaminar Fracture Properties" |
Jia-Lin Tsai and Ming-Dao Wu |
The American Society for Composites, 21th Technical Conference |
Dearborn, MI |
| 2005 |
"Investigating Organoclay Effect on Fracture Behaviors of Epoxy Nanocomposites" |
Jia-Lin Tsai and Shin-Ming Hsu |
Society of Theoretical and Applied Mechanics of the Republic of China 29th National Conference on Theoretical and Applied Mechanics |
|
| 2005 |
"Fabrication and Mechanical Properties of Glass Fiber/Epoxy Nanocomposites" |
Jia-Lin Tsai and Jui-Ching Kuo and Shin-Ming Hsu |
International Conference on Advanced Manufacture |
Taipei, Taiwan |
| 2005 |
"Organoclay Effect on Mechanical Behaviors of Fiber Reinforced Polymeric Nanocomposites" |
Jia-Lin Tsai, Jui-Ching Kuo and Shin-Ming Hsu |
The American Society for Composites, 20th Technical Conference |
Hsinchu, Taiwan |
| 2005 |
"Characterizing Nonlinear Rate Dependent Behaviors of Fiber Composites Using Micromechanical Approach" |
Kuei-Han Chen, Jui-Ching Kuo and Jia-Lin Tsai |
The American Society for Composites, 20th Technical Conference |
Drexel University, Philadelphia |
| 2004 |
Effect of Nano-Reinforcement on Dynamic Mechanical Behaviors of Nylon 6/Clay Nanocomposites |
Jia-Lin Tsai and Jen Chieh Huang |
Proceedings of The American Society for Composites, 19th Technical Conference |
Atlanta, Georgia |
| 2004 |
Investigating High Strain Rate Responses of Nylon 6/ Clay Nanocomposites |
Jia-Lin Tsai and Jen-Chieh Huang |
The Fourth Asian-Australasian Conference on Composite Materials |
Sydney, Australia |
| 2004 |
Modeling Dynamic Compressive Failure of Unidirectional Composites |
J. Tsai |
Eighth destruction of the Republic of China Scientific Symposium |
Kenting, Taiwan |
| 2003 |
Constitutive Model for Rate Dependent Behavior of Composites Laminates |
J. Tsai and Hamvey Wang |
20th National Conference of the Chinese Mechanical Engineering Society |
Taipei, Taiwan |
| 2003 |
Characterizing Rate Dependent Behavior of Composite Laminates |
J. Tsai and Hamvey Wang |
Proceedings of The American Society for Composites, 18th Technical Conference |
Gainesville, Florida |
| 2003 |
Strain Rate Effect on In-plane Shear Strength of Unidirectional Polymeric Composites
|
J. Tsai and C.T. Sun
|
the 14th International Conference on Composite Materials |
San Diego, California |
| 2002 |
Measuring Dynamic Fracture Toughness in Polymeric Composites
|
J. Tsai and C.T. Sun
|
International Symposium on Experimental Mechanics |
Taipei, Taiwan |
| 2002 |
The Effect of Platelet Dispersion on the Load Transfer Efficiency in Nanoclay Composites
|
J. Tsai and C.T. Sun
|
Proceedings of The American Society for Composites, 17th Technical Conference |
West Lafayette, Indiana |
| 2002 |
Strain Rate Effect on Compressive and Shear Strengths of Polymeric Composites
|
C.T. Sun and J.L. Tsai
|
the Fourteenth U.S. National Congress of Theoretical and Applied Mechanics |
Blacksburg, Virginia |
| 2002 |
The Effect of Platelet Distribution on the Modulus of Nanoclay Composites
|
C.T. Sun and J.L. Tsai
|
the Fourteenth U.S. National Congress of Theoretical and Applied Mechanics |
Blacksburg, Virginia |
| 2001 |
Comparison of Microbuckling Model and Kink Band Model in Predicting Compressive Strengths of Composites
|
C.T. Sun and J.L. Tsai
|
the 13th International Conference on Composite Materials |
Beijing, China |
| 2000 |
Strain Rate Effect on Dynamic Compressive Failures in Off-Axis Glass-Epoxy Composites
|
J. Tsai and C.T. Sun
|
Proceedings of the 2000 ASME International Mechanical Engineering Congress & Exposition |
Orlando, Florida |
| 2000 |
Nonlinear Constitutive Model for High Strain Rate Response in Polymeric Composites
|
J. Tsai and C.T. Sun
|
Proceedings of The American Society for Composites, Fifteenth Technical Conference |
|
| 1999 |
Dynamic Interlaminar Fracture Toughness in Polymeric Composites
|
C.T. Sun and J. Tsai
|
Proceedings of the 12th International Conference on Composite Materials |
Paris, France |
| 1998 |
Mixed Mode Dynamic Delamination Crack Propagation in Polymeric Composites
|
C.T. Sun and J. Tsai
|
Proceedings of the 13th U. S. National Congress of Applied Mechanics |
Gainesville, FL |
NYCU ME