崔燕勇（2019年退休）
姓名 崔燕勇（2019年退休）
職 稱 教授
組別 能源與熱流組
授課領域 熱流計算分析、氣體動力學、紊流、內燃機引擎
研究專長 雙流體、兩相流、流固耦合、可壓縮流等計算
國家 學校名稱 系所 學位 期間
英國 倫敦大學帝國理工學院Imperial College London 流體力學 博士 1982.04 ~ 1986.12
美國 田納西大學太空學院U. Teen Space Institute 航太工程 碩士 1978.10 ~ 1981.03
服務機關名稱 單位 職務 期間
國立交通大學 機械工程系 教授 1996.08 ~ 2019.07
國立交通大學 機械工程系 副教授 1988.02 ~ 1996.07
Imperial College 機械系 博士後研究 1987.05 ~ 1987.11
Imperial College 機械系 博士前研究 1982.04 ~ 1987.04
田納西大學太空學院 氣動力組 助理研究員 1978.10 ~ 1981.03
年度 計畫名稱 參與人 職稱/擔任之工作 計畫期間 補助/委託或合作機構
2010 發展適用於非結構性網格之雙流體流場界面捕捉及界面追蹤計算方法(2/3) 崔燕勇 計畫主持人 2010.08 ~ 2012.07 國科會
2010 垂直軸式層狀型風力發電系統之研製-子計畫一：垂直軸式層狀風力發電機氣動力設計與性能監測之研究(II) 崔燕勇 計畫主持人 2010.01 ~ 2011.03 國科會
2009 發展適用於非結構性網格之雙流體流場界面捕捉及界面追蹤計算方法(1/3) 崔燕勇 計畫主持人 2009.08 ~ 2012.07 國科會
2008 層流攪拌器流體混合研究(2/2) 崔燕勇 計畫主持人 2008.08 ~ 2009.07 國科會
年度 論文名稱 全部作者 期刊名稱 期數
2014 Modeling of Heat Transfer across the Interface in Two-Fluid Flows Yeng-Yung Tsui Numer. Heat Transfer, Part B
2014 Phase Change Calculations for Film Boiling Flows Y.-Y. Tsui, S.-W. Lin, Y.-N. Lai, and F.-C. Wu Int. J. Heat Mass Transfer
2014 Pumping Flow in a Channel with a Peristaltic Wall Y.-Y. Tsui, D.-C. Guo, S.-H. Chen and S.-W. Lin ASME J. Fluids Eng.
2013 A Finite-Volume Based Approach for Dynamic Fluid-Structure Interaction Yeng-Yung Tsui Numer. Heat Transfer, Part B
2013 A VOF-Based Conservative Interpolation Scheme for Intrface Tracking (CISIT) of Two-Fluid Flows Y.-Y. Tsui, S.-W. Lin Numer. Heat Transfer, Part B
2012 A Novel Peristaltic Micropump with Low compression ratios Y.-Y. Tsui and T.-C. Chang Int. J. Numer. Meth. Fluids
2011 Flow Characteristics in Mixers Agitated by Helical Ribbon Blade Impeller Y.-Y. Tsui and Y.-C. Hu Engineering Applications of Computational Fluid Mechanics 3
2009 Use of Characteristic-Based Flux Limiters in A Pressure-Based Unstructured-Grid Algorithm Incorporating High-Resolution Schemes Yeng-Yung Tsui Numer. Heat Transfer, Part B
2009 Flux-Blending Schemes for Interface Capture in Two-Fluid Flows Y.-Y Tsui, S.-W. Lin, T.-T. Cheng and T.-C. Wu Int. J. Heat Mass Transfer
2009 Modeling of Valveless Micropumps Y.-Y Tsui and S.-E. Wu Numer. Heat Transfer Part A
2008 Evaluations of the Performance of a Valveless Micropump by CFD and Lumped-System Analyses Y.-Y. Tsui and S.-L. Lu Sensors and Actuators Part A
2008 Evaluation of the Mixing Performance of the Micromixers With Grooved or Obstructed Channels Y.-Y. Tsui, C.-S. Yang, and C.-M. Hsieh ASME J. Fluids Eng. 071102
2008 Mixing Flow Characteristics in a Vessel Agitated by the Screw Impeller with a Draught Tube Y.-Y. Tsui and Y.-C. Hu ASME J. Fluids Eng. 041103
2008 Analysis of the Flow Agitated by the Disc Impellers with Pitched Blades Y-Y. Tsui, S.-C. Lin, S.-J. Shen, and Y.-C. Hu Numer. Heat Transfer Part A
2008 A Pressure-Based Unstructured-Grid Algorithm Using High Resolution Schemes for All-Speed Flows Y.-Y Tsui and T.-C. Wu Numer. Heat Transfer Part B
2008 Side-Wall Effects on the Bifurcation of the Flow through a Sudden Expansion Y.-Y. Tsui and H.-W. Wang Int. J. Numer. Meth. Fluids
2006 A Study of the Recirculating flow in Planar, Symmetrical Branching Channels Y.-Y. Tsui and C.-Y. Lu Int. J. Numer. Meth. Fluids
2006 Blade Angle Effects on the Flow in a Tank Agitated by the Pitched-Blade Turbine Y.-Y. Tsui, J.-R. Chou, and Y.-C. Hu ASME J. Fluids Eng
2006 Analysis of the Flow in Grooved Pumps with Specified Pressure Boundary Conditions Y.-Y. Tsui and S.-P. Jung Vacuum
2006 A Pressure-Correction Method for Incompressible Flow Using Unstructured Meshes Y.-Y. Tsui and Y.-F. Pan Numer. Heat Transfer Part B
2005 Blade Angle Effects on the Flow in a Tank Agitated by the Pitched-Blade Turbine Y.-Y. Tsui, J.-R. Chou, Y. -C. Hu ASME J. Fluids Eng.(in revision)
2005 Side Wall Effects on the Bifurcation of the Flow through a Sudden Expansion Y.-Y. Tsui and H.-W. Wang Int. J. Heat Fluid Flow(submitted)
2005 Analysis of the Flow in Grooved Pumps with Specified Pressure Boundary Conditions Y.-Y. Tsui and S.-P. Jung Vacuum(in print)
2005 A Study of the Recirculating flow in Branching Channels Y.-Y. Tsui and C.-Y. Lu Int. J. Numer. Meth. Fluids(in print)
2002 FlowCharacteristics of the Molecular Pump of Holweck TypeIn the Slip Flow Regime Y. Y. Tsui, C. P. Kung and H. P. Cheng ASME J. Fluids Eng.
2001 Modelingof the Slip Flow in the Spiral Grooves of a MolecularPump Y. Y. Tsui, C. P. Kung and H. P. Cheng J. Vac. Sci. Technol. A No.6,
2001 Analysis ofthe Flow in the Grooves of a Molecular Pump Y. Y. Tsui, C. P. Kung and H. P. Cheng Numer.Heat Transfer
2000 Effects of Lobe Geometryon the Mixing Flow in Multilobe Mixers Y. Y. Tsui and P. W. Wu Numer. Heat Transfer Part A
2000 Low-PressureThree-Dimensional Continuum Flow Simulation in TurboVacuum Pumps H. P. Chen and Y. Y. Tsui Trans. Aeron. Astron. Soc. R.O.C. No.1
2000 Heat Transfer Enhancement by Multilobe VortexGenerators: Effects of Lobe Parameters Y. Y. Tsui, S. W. Leu, C. C. Lin, and P. W. Wu Numer. Heat Transfer Part A
1999 Heat TransferEnhancement by a Multilobe Vortex Generator inInternally Finned Tubes Y. Y. Tsui and S. W. Leu Numer. Heat Transfer Part A
1998 Effects of Buoyancy and Orientation on the Flow in a Duct Preceded with a Double–Step Expansion Y. Y. Tsui and S. J. Shu Int. J. Heat Mass Transfer No. 17
1998 Investigation of Flowand Heat Transfer in Vertical CVD Reactors Y. Y. Tsui and C. H. Chen Proc. Natl.Sci. Counc. ROC(A) No. 1
1997 Tumbling/SquishInteraction in Loop-Scavenged Two-Stroke Engines Y. Y. Tsui and H. P. Cheng Numer. Heat Transfer Part A
1997 Characterization ofTumbling Motion in IC Engine by Vorticity Y. Y. Tsui and H. P. Cheng J. Chinese.Soc. Mech. Eng. No. 5
1996 Scavenging Process inLoop-Scavenged Two-Stroke Engines Y. Y. Tsui and H. P. Cheng J. Chinese. Soc.Mech. Eng. No. 5
1996 High-OrderScheme Calculation of Turbulent Flow in AxisymmetricDiffusers Y. Y. Tsui, G. C. Liou and P. W. Wu J. Chinese. Soc. Mech. Eng. No. 4
1996 An Investigation of theMixing Flow Structure in Multi-Lobe Mixers Y. Y. Tsui and P. W. Wu AIAA J. No.7
1995 Tumbling Flow in Loop-Scavenged Two-Stroke Engines Y. Y. Tsui and H. P. Cheng ASME J. Fluids Eng
1995 Calculation of Laminar Separated Flow in Symmetric Two-Dimensional Diffuser Y. Y. Tsui and C. K. Wang ASME J. Fluids Eng
1994 Flow Calculation in a Loop Scavenged Two-Stroke Motored Engine Y. Y. Tsui and H. P. Cheng Int. J.Number. Meth. Heat & Fluid Flow No. 3
1994 Flow Modeling in Turbofan Mixing Duct, Number Y. Y. Tsui, P. W. Wu and C. W. Liao Heat Transfer No. 2,Part A
1994 Flow Calculation in a Loop-Scavenged Direct-Injection Two-Stroke Engine Y. Y. Tsui, P. J. Chen and S. J. Yu J. Chinese Soc. of Mech. Eng No. 1
1992 Calculation of Turbulent Flow Through Engine Inlet Ports Y. Y. Tsui and S. Y. Lee Int. J. Heat and Fluid No. 3
1991 A Study of Upstream–Weighted High Order Differencing for Approximation to Flow Convection Y. Y. Tsui Int. J. Number. Meth. Fluids No. 2
年度 論文名稱 全部作者 會議名稱 地點
2005 Separated Flows in Symmetric Branching Channels, Proc Y.-Y. Tsui and C.-Y. Lu 12th National Conference on CFD
2005 Flow in the Spiral Grooves of a Vacuum Pumps with Pressure Boundary Conditions, Proc. Y.-Y. Tsui and S.-P. Jung 12th National Conference on CFD.
2003 A Numerical Method for the Pumping Flow with Pressure Boundary Conditions, Proc. Y.-Y. Tsui and S.-P. Jung 20th National Conference on Mechanical Engineering, CSME.
2003 A Pressure -Based Unstructured Grid Calcula tion for Compressible Flow, Proc. Y.-Y. Tsui and T.-C. Wu 10th National Conference on CFD (in Chinese).
2003 A Pressure-Correction Method for Unstructured Meshes with Arbitrary Polygons, Proc. Y.-Y. Tsui 10th National Conference on CFD.
1996 Effects of Orientation on the Mixed Convection in a Duct with a Double-Step Expansion, Proc. Y. Y. Tsui and S. J. Shu 20th National Conference on Mechanical Engineering, CSME
1996 Buoyancy-Assisted Flow in a Vertical Duct Preceded with Symmetric Diffusers, Proc. Y. Y. Tsui and S. J. Shu 20th National Conference on Mechanical Engineering, CSME
1994 Laminar Flow Calculation In Planar Diffusers, Proc. Y. Y. Tsui and C. K. Wang 18th National Conference on Theoretical and Applied Mechanics
1994 Comparison of High-Order Schemes in Calculating the Flow in Multilobe Mixer, Proc. Y. Y. Tsui and P. W. Wu 18th National Conference on Theoretical and Applied Mechanics
1994 High-Order Scheme Calculation of Turbulent Flow in Axisymmetric Diffusers, Proc. Y. Y. Tsui, G. C. Liou and P. W. Wu 11th National Conference on Mechanical Engineering, CSME
1993 Analysis of 3-D Flow in the Lobe Mixers of Turbofan Engine, Proc. Y. Y. Tsui, P. W. Wu and C. W. Liao AASRC 35th Aeronautics and Astronautics Conference
1993 Flow Analysis in the Transfer Passage/Cylinder Assembly of Two-Stroke Engine, Proc. Y. Y. Tsui, G. S. Lue, P. W. Wu and H. P. Cheng 10th National Conference on Mechanical Engineering, CSME
1993 Numerical Investigation of the Flow in a Loop-Scavenged Two-Stroke Engine with Curved Cylinder Heads, Proc. Y. Y. Tsui and H. P. Cheng 10th National Conference on Mechanical Engineering, CSME (in Chinese)
1992 Calculation of the Flow in a Loop-Scavenged Two-Stroke Motored Engine, Proc. Y. Y. Tsui and H. P. Cheng 9th National Conference on Mechanical Engineering, CSME
1992 Calculation of the flow in a Loop-Scavenged Direct-Injection Two-Stroke Engine, Proc. Y. Y. Tsui, P. J. Chen and S. J. Yu 9th National Conference on Mechanical Engineering, CSME
1991 Flow Calculation Using Nonstaggered Grids Y. Y. Tsui and J. Y. Lin Proc. 8th National Conference on Mechanical Engineering, CSME
1987 Gaseous Simulation of Diesel Sprays Arcoumains, A. D. Gosman, J. H. Whitelaw, Y. Y. Tsui and K. Y. Wong SAE Paper 872090
1985 Calculation of Unsteady Three-Dimensional Flow in a Model Motored Engine and Comparison with Experiment D. Gosman, Y. Y. Tsui, A. P. Watkins The Fifth Symposium on Turbulent Shear Flows Cornell University
年度 名稱 發表日期
2012 熱流計算 2012-06-21
2012 兩相流計算 2012-06-21
2012 非結構性網格 2012-06-21
2012 液固耦合計算 2012-06-21