Seminar Speaker: Dr. Chen-yang Lan (藍振洋 助理教授)
Title: A Method Connecting the Past, the Present and the Future
Date: 2021/12/2 (Thursday) 3:30 pm – 5:20pm
Location: video conference (https://reurl.cc/q18jL3)

Outline:
1. Introduction
2. Least Square Methods – Looking Back 3. in Energy Consumption Measurement and Verification 4. in Indoor Positioning Biography:
Chen-yang Lan received the B.S. degree in mechanical
engineering from National Tsing Hua University, Hsinchu, Taiwan, in 1998, the M.S. degree in mechanical engineering from Texas A&M University, in 2004, and the Ph.D. degree in mechanical engineering from Texas A&M University, in 2008. He is currently an assistant professor in the Department of Mechanical Engineering, National Taiwan University of Science and Technology (NTUST), Taipei, Taiwan. His research interests include intelligent control systems, quantitative feedback theory, system identification, condition monitoring, fault detecting and isolation and energy measurement and verification. His research works appear in MDPI Sensors, MDPI Energies, International Journal of Robust and Nonlinear Control, IEEE
Conference on Decision and Control, American Control Conference and ASME Dynamic Systems and Control Conference.

EDUCATION
Texas A&M University, Mechanical Engineering, College Station, Texas, 2004/6 – 2008/8
Doctor of Philosophy, feedback control
Dissertation: A Novel Feedback Design Method for MIMO QFT – with application to the X-29 control problem.
Dissertation Advisor: Prof. Suhada Jayasuriya

Texas A&M University, Mechanical Engineering, College Station, Texas, 2001/9 – 2004/5
Master of Science, feedback control
Thesis: Synthesis of Controllers for Non-minimum Phase and Unstable
Systems Using Non-sequential MIMO Quantitative Feedback Theory.
Thesis Advisor: Prof. Suhada Jayasuriya
National Tsing Hua University, Mechanical Engineering, Hsinchu, Taiwan,1994/9 – 1998/5
Bachelor of Science

PROFESSIONAL EXPERIENCE
Assistant Professor, Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, 2018/2 – Present.
Technical Director, Aliya Inc., Hsinchu County, Taiwan, 2015/1 – 2017/10.
Engineer, Engineering Department, Chief SI., Hsinchu County, Taiwan,2014/4 – 2014/10.
Researcher, Green Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu County, Taiwan, 2010/11 – 2014/2.
Manager, Ciao Sole Corporation (Startup Company), Kaohsiung, Taiwan, 2010/7 – 2010/10.
Chief Engineer, Department of Research and Development, Sunrise Global Solar Energy Co. Ltd., Yilan County, Taiwan, 2009/9 – 2010/6 .

PEER-REVIEWED FULL LENGTH PUBLICATIONS

1. 1. Widagdo Purbowaskito, Chen-Yang Lan, Kenny Fuh, 2021, “A Novel Fault Detection and Identification Framework for Rotating Machinery Using Residual Current Spectrum”, Sensors, 21(17), 5865. (SCIE, IF: 3.576, Q2)
2. 2. Widagdo Purbowaskito, Chen-Yang Lan, Meng-Kun Liu, Kenny Fuh, 2020, "A Novel Scheme on Fault Diagnosis of Induction Motors using Current per Voltage Bode Diagram", Journal of the Chinese Society of Mechanical Engineers (中國機械工程學刊), 41(6), pp. 781-790. (SCIE)
3. 3. Minh-Quang Tran, Yi-Chen Li, Chen-Yang Lan, Meng-Kun Liu, 2020,“Wind Farm Fault Detection by Monitoring Wind Speed in the Wake Region,” Energies, 34(24), 6559. (SCIE, IF: 2.702, Q3, Energy & Fuels)
4. 4. Chia-Yen Lee, Ting-Syun Huang, Meng-Kun Liu, Chen-Yang Lan, 2019, "Data science for vibration heteroscedasticity and predictive maintenance of rotary bearings," Energies, 12(5), p.801. (SCIE, IF: 2.707, Q3, 56/103, Energy & Fuels)
5. 5. 陳韋銘,黃子鴻,藍振洋,張文綺（2013年07月）。點吸收式波浪發電機開發(SCI)。海洋及水下科技季刊，(II), 15-31。
6. 6. Kerr L. Murray, Chen-Yang Lan, Suhada Jayasuriya, 2007, “Non-
7. 7. sequential MIMO QFT Control of the X-29 aircraft using a generalized formulation,” International Journal of Robust and Nonlinear Control;17:107-134. (SCI, IF 4.406)

PEER-REVIEWED CONFERENCE PROCEEDINGS

1. 1. Shih Chia Fan-Chiang, Chen-Yang Lan, Peter Chang, “Automatic Wheel Fault Detection of Omni-direction Vehicle with Mecanum Wheel”, The 9th International conference on Advanced Robotics and Intelligent Systems, Online, Virtual, 2021.
2. 2. Hong-Qian Liou, Chen-Yang Lan, Peter Chang, “LoRa Platform Development for Energy Saving Verification for Industry 4.0 Application”, The 9th International conference on Advanced Robotics and Intelligent Systems, Online, Virtual, 2021.
3. 3. Jyun-Yao Hong and Chen-yang Lan, “Complementary filter implementation in a myRIO based quadrotor for the attitude estimation”, The 9th International conference on Advanced Robotics and Intelligent Systems, Online, Virtual, 2021.
4. 4. Widagdo Purbowaskito, Chen-Yang Lan, Meng-Kun Liu, and Kenny Fuh,“Centrifugal Pumps Fault Diagnosis using Data-Driven Model-based Fault Diagnosis”, The 9th International conference on Advanced Robotics and Intelligent Systems, Online, Virtual, 2021.
5. 5. Yu-Yang Lo, Wei-Chen Lai, Po-Yan Wu, Chen-Yang Lan and I-Tsyuen Chang, “Energy Saving Assessment for Energy Conservation Measure on the Air Blowers”, The 2021 International Automatic Control Conference, National Chung Cheng University, Chiayi, Taiwan, 2021.
6. 6. Liu H.-C., Wu B.-C., Lan C.-Y., and Chang P., “Factory Device Energy Saving Performance Verification with IOT Application”, The 18th International Conference on Automation Technology, National Quemoy University, Kimmen, Taiwan, 2021.
7. 7. Po-Jui Chiu, Hui-Che Hsu, Yu-Yen Lo, Yi-Cheng Yan and Chen-Yang Lan, “Realization for Indoor Autonomous Position Hovering of Quadrotor”, The 18th International Conference on Automation Technology, National Quemoy University, Kimmen, Taiwan, 2021.
8. 8. I-Tsyuen Chang, Chih-Cheng Liu, Shih-Chia Fan-Chiang, Chen-Yang Lan(2020 Nov). Signal-based and Model-based Wheel Fault Detection of Omni-directional Vehicle with Mecanum Wheel. CACS 2020, Hsinchu, Taiwan.
9. 9. Widagdo Purbowaskito, Chen-Yang Lan, Meng-Kun Liu, Kenny Fuh (2020, Aug). Data-driven Model-based Fault Detection and Identification of the Induction Motor in Industrial Cases. ARIS 2020, Taipei, Taiwan.
10. 10. Wei-Ting Hsu, Chen-yang Lan, Meng-Kun Liu and Shu-Tzu Chang (2019, Oct). Current Signature Fault Analysis on Industrial Machines. ISRM 2019, Taipei, Taiwan.
11. 11. Wei-Ting Hsu, Chen-yang Lan, Meng-Kun Liu and Shu-Tzu Chang (2019, Oct). Fault Signature Analysis of Induction Machines. AMPT 2019, Taipei, Taiwan.
12. 12. Meng-Kun Liu, Cheng-Hsuan Hsiao, and Chen-Yang Lan (2019, Oct). Sensorless Fault Diagnosis of Three-phase Permanent Magnet Synchronous AC Servo Motor. AMPT 2019, Taipei, Taiwan.
13. 13. Meng-Kun Liu, Shou-Min Homg. Chen-Yang Lan (2018, Dec). A Preliminary Study on Active Fault Detection Of the 3-Axis Robot Arm System. The 15th International Confernce on Automation Technology (Automation 2018), Taichung, Taiwan.
14. 14. 林軒志、劉孟昆、藍振洋、陳國樑（2017年12月）。感應馬達異常對能源耗損之影響。中國機械工程學會第三十四屆全國學術研討會論文集，台中, 台灣。
15. 15. 郭翰、劉孟昆、翁鵬易、藍振洋（2017年12月）。感應馬達異常診斷方法之比較。中國機械工程學會第三十四屆全國學術研討會論文集，台中,台灣